The Digital Coating Thickness Gauge Elcometer 456 separate coating thickness gauge sets new standards measuring the thickness of a coating, helping you to become more efficient.
Separate models, with their wide range of probes, provide even greater measurement flexibility.
All probes are fully interchangeable; whilst ferrous gauges accept any ferrous probe and non-ferrous gauges accept any non-ferrous probes the dual FNF gauges accept all ferrous, non-ferrous, and dual FNF probes.
Beginning with Model E and ending with Model T, the Elcometer 456 is available in four different models. Our most advanced model, Model T features memory, alpha-numeric batching, and Bluetooth® communication.
Note: The Elcometer 456 Separate gauges require the use of a compatible probe – Sold Separately.
Helping you become more efficient
70+ readings per minute and 140+ per minute with Scan Probe, multiple calibration memories and alphanumeric batch identification.
Accurate measurements on smooth, rough, thin and curved surfaces
Measures on smooth, rough, thin and curved surfaces to ±1% in accordance with National & International Standards.
Large buttons and colour screen
LCD screen with auto rotate; factory calibrated with high and low reading limit indicators in multiple languages.
Designed to last
Heavy duty, impact resistant and supplied with fully traceable test certificates.
Store up to 150,000 readings in 2,500 batches
Measures up to 31mm (1,220mils) of coating on metal substrates with USB and Bluetooth® data output making it compatible with ElcoMaster® software.
Technical Specification
| Model B | Model S | Model T | Certificate | |
| Elcometer 456 Ferrous Separate | A456CFBS | A456CFSS | A456CFTS | ● |
| Elcometer 456 Non-Ferrous Separate | A456CNBS | A456CNSS | A456CNTS | ● |
| Elcometer 456 Dual FNF Separate | A456CFNFBS | A456CFNFSS | A456CFNFTS | ● |
| Display Information | 2.4” (6cm) QVGA colour TFT display, 320 x 240 pixels | |||
| Battery Type | 2 x AA batteries, rechargeable batteries can also be used | |||
| Battery Life | approximately 24 hours of continuous use at 1 reading per second* | |||
| Gauge Dimensions (h x w x d) | 141 x 73 x 37mm (5.55 x 2.87 x 1.46”) | |||
| Gauge Weight (including batteries supplied) | 161g (5.68oz) | |||
| Operating Temperature | -10 to 50°C (14 to 122°F) | |||
| Packing List | Elcometer 456 gauge, wrist harness, transit case (T), protective case (B, S, T), 1 x screen protector (S, T), 2 x AA batteries, operating instructions, USB cable (S, T), ElcoMaster® software (S, T) |
|||
* Using default settings & lithium batteries, alkaline or rechargeable batteries may differ
The Digital Coating Thickness Gauge Elcometer 456 separate coating thickness gauge sets new standards measuring the thickness of a coating, helping you to become more efficient.
Separate models, with their wide range of probes, provide even greater measurement flexibility.
All probes are fully interchangeable; whilst ferrous gauges accept any ferrous probe and non-ferrous gauges accept any non-ferrous probes the dual FNF gauges accept all ferrous, non-ferrous, and dual FNF probes.
Beginning with Model E and ending with Model T, the Elcometer 456 is available in four different models. Our most advanced model, Model T features memory, alpha-numeric batching, and Bluetooth® communication.
Note: The Elcometer 456 Separate gauges require the use of a compatible probe – Sold Separately.
Helping you become more efficient
70+ readings per minute and 140+ per minute with Scan Probe, multiple calibration memories and alphanumeric batch identification.
Accurate measurements on smooth, rough, thin and curved surfaces
Measures on smooth, rough, thin and curved surfaces to ±1% in accordance with National & International Standards.
Large buttons and colour screen
LCD screen with auto rotate; factory calibrated with high and low reading limit indicators in multiple languages.
Designed to last
Heavy duty, impact resistant and supplied with fully traceable test certificates.
Store up to 150,000 readings in 2,500 batches
Measures up to 31mm (1,220mils) of coating on metal substrates with USB and Bluetooth® data output making it compatible with ElcoMaster® software.
Technical Specification
| Model B | Model S | Model T | Certificate | |
| Elcometer 456 Ferrous Separate | A456CFBS | A456CFSS | A456CFTS | ● |
| Elcometer 456 Non-Ferrous Separate | A456CNBS | A456CNSS | A456CNTS | ● |
| Elcometer 456 Dual FNF Separate | A456CFNFBS | A456CFNFSS | A456CFNFTS | ● |
| Display Information | 2.4” (6cm) QVGA colour TFT display, 320 x 240 pixels | |||
| Battery Type | 2 x AA batteries, rechargeable batteries can also be used | |||
| Battery Life | approximately 24 hours of continuous use at 1 reading per second* | |||
| Gauge Dimensions (h x w x d) | 141 x 73 x 37mm (5.55 x 2.87 x 1.46”) | |||
| Gauge Weight (including batteries supplied) | 161g (5.68oz) | |||
| Operating Temperature | -10 to 50°C (14 to 122°F) | |||
| Packing List | Elcometer 456 gauge, wrist harness, transit case (T), protective case (B, S, T), 1 x screen protector (S, T), 2 x AA batteries, operating instructions, USB cable (S, T), ElcoMaster® software (S, T) |
|||
* Using default settings & lithium batteries, alkaline or rechargeable batteries may differ
