Phase II Coating Thickness Gauge with auto-detect

Phase II-PTG-4000
automotive auctions, manufacturing, general engineering, commercial inspection, etc

$637.00 CAD

  • 12 months limited warranty
  • Display: 3 digit color LCD
  • Integrated probe that can automatically detect a ferrous or non-ferrous substrate.
  • 0.1mm/0.01 mils (0 – 99mm) or 1mm (over 100mm)

Support, maintenance, calibration
1 800 463-4363

 

The Phase II coating thickness gauge PTG-4000 can perform two different methods of calculating thickness measurement by utilizing the characteristics of both eddy current and magnetic induction.

Can be used in many areas of industry including automotive auctions, manufacturing, general engineering, commercial inspection, etc. Utilizes an integrated probe that can automatically detect a ferrous or non-ferrous substrate and comes with 2 substrate samples (steel, aluminum), 4 calibrated thickness samples, a carry case, batteries, and an operation manual.

PTG-4000 main uses :

  1. Automotive Auctions
  2. Manufacturing
  3. General Engineering
  4. Commercial Inspection

With this state-of-the-art gauge, you can easily detect the thickness of the non-magnetic coating on a magnetic substrate (ferrous) or an insulating coating on a non-magnetic conductive substrate (non-ferrous) utilizing our auto-detect, integrated probe.

Phase II Coating Thickness Gauge PTG 4000 Coating Thickness Gauge Revised

There are many uses for the Phase II brand coating thickness gauges, (paint meters, paint thickness meters, paint gauges) in the automotive industry. One such application for these portable paint thickness meters would be for fast and accurate detection of a refinished surface. Auto auctions/car auctions are a popular method to sell vehicles that have been refinished for a variety of reasons. Most of the time an unsuspecting buyer will not be aware of this or of the quality of the refinishing job which can end up being very costly to the buyer of said vehicle. Insurance inspectors and appraisers at car auctions often use these paint meters/coating thickness gauges/paint thickness meters to evaluate the current condition and quality of paint on a vehicle in question. To alleviate paint quality issues, the buyers/inspectors at car auctions, body shops, auto dealers, etc must be prepared to take a fast yet accurate paint thickness reading of paint on the body panels before making a final decision. That�s where our PTG Series of paint gauges come in. With worldwide distribution, these portable coating thickness gauges can be purchased through any auto body shop supply facility, car dealer supply co, as well as any tooling distribution company. Call us direct for the nearest dealer to your facility.

With automatic substrate detection, these paint thickness meters/gauges can perform accurate and non-destructive thickness measurements in seconds. Those few seconds can be the difference between making a profit on a vehicle or losing valuable time and resources.

Buyers of this type of coating thickness gauges/paint meter, would-be car dealerships, auto body shops, insurance inspectors/appraisers, black book car buyers, professional car buyers, auto auctions/car auctions, body shop supplies, and any other profession that needs quick, precise paint thickness measurements.

Other applications for the Phase II paint meter/auto dealer paint meter, would include but are not restricted to any refinishing shop for cars, trucks, tractors, or any other steel or aluminum body panel that is sprayed with a coating.

PTG-4000 main features

  1. Display: 3 Digit Color LCD
  2. Statistics: Min/Max, Average, Std Deviation
  3. Single or Continuous Measurement (Selectable)

Specifications – Phase II Coating Thickness Gauge

Measuring Range 0-1,250micron max. or 0-50 mils / 0.1mils
Accuracy +/- 3% + 2 micron ( +/-3%+0.1 mil )
Display 3 digit color LCD
Statistics Min/Max, Average, Std Deviation
Single or Continuous Measurement Selectable
Min. substrate thickness 20 mils (0.5mm) Non-ferrous: 2 mils (50micron)
Power 2 AAA
Dimensions 100 x 52 x 29mm

The Phase II coating thickness gauge PTG-4000 can perform two different methods of calculating thickness measurement by utilizing the characteristics of both eddy current and magnetic induction.

Can be used in many areas of industry including automotive auctions, manufacturing, general engineering, commercial inspection, etc. Utilizes an integrated probe that can automatically detect a ferrous or non-ferrous substrate and comes with 2 substrate samples (steel, aluminum), 4 calibrated thickness samples, a carry case, batteries, and an operation manual.

PTG-4000 main uses :

  1. Automotive Auctions
  2. Manufacturing
  3. General Engineering
  4. Commercial Inspection

With this state-of-the-art gauge, you can easily detect the thickness of the non-magnetic coating on a magnetic substrate (ferrous) or an insulating coating on a non-magnetic conductive substrate (non-ferrous) utilizing our auto-detect, integrated probe.

Phase II Coating Thickness Gauge PTG 4000 Coating Thickness Gauge Revised

There are many uses for the Phase II brand coating thickness gauges, (paint meters, paint thickness meters, paint gauges) in the automotive industry. One such application for these portable paint thickness meters would be for fast and accurate detection of a refinished surface. Auto auctions/car auctions are a popular method to sell vehicles that have been refinished for a variety of reasons. Most of the time an unsuspecting buyer will not be aware of this or of the quality of the refinishing job which can end up being very costly to the buyer of said vehicle. Insurance inspectors and appraisers at car auctions often use these paint meters/coating thickness gauges/paint thickness meters to evaluate the current condition and quality of paint on a vehicle in question. To alleviate paint quality issues, the buyers/inspectors at car auctions, body shops, auto dealers, etc must be prepared to take a fast yet accurate paint thickness reading of paint on the body panels before making a final decision. That�s where our PTG Series of paint gauges come in. With worldwide distribution, these portable coating thickness gauges can be purchased through any auto body shop supply facility, car dealer supply co, as well as any tooling distribution company. Call us direct for the nearest dealer to your facility.

With automatic substrate detection, these paint thickness meters/gauges can perform accurate and non-destructive thickness measurements in seconds. Those few seconds can be the difference between making a profit on a vehicle or losing valuable time and resources.

Buyers of this type of coating thickness gauges/paint meter, would-be car dealerships, auto body shops, insurance inspectors/appraisers, black book car buyers, professional car buyers, auto auctions/car auctions, body shop supplies, and any other profession that needs quick, precise paint thickness measurements.

Other applications for the Phase II paint meter/auto dealer paint meter, would include but are not restricted to any refinishing shop for cars, trucks, tractors, or any other steel or aluminum body panel that is sprayed with a coating.

PTG-4000 main features

  1. Display: 3 Digit Color LCD
  2. Statistics: Min/Max, Average, Std Deviation
  3. Single or Continuous Measurement (Selectable)

Specifications – Phase II Coating Thickness Gauge

Measuring Range 0-1,250micron max. or 0-50 mils / 0.1mils
Accuracy +/- 3% + 2 micron ( +/-3%+0.1 mil )
Display 3 digit color LCD
Statistics Min/Max, Average, Std Deviation
Single or Continuous Measurement Selectable
Min. substrate thickness 20 mils (0.5mm) Non-ferrous: 2 mils (50micron)
Power 2 AAA
Dimensions 100 x 52 x 29mm