Barcol hardness tester HPE II

Bareiss - HPE II Barcol

$3,293.50 CAD

  • 12 months limited warranty
  • Memory for 300 measured values
  • Lithium battery 3.6 V with approx. 2000 hours operating time
  • Data output RS 232

Support, maintenance, calibration
1 800 463-4363

 

SKU: HPE II Barcol Categories: ,

This measurement model applies to more rigid objects such as fiberglass, reinforced plastics, thermoplastic, or aluminum alloys

Measure hardness on fiberglass reinforced plastics, thermoset material, hard thermoplastic resin, aluminum etc. Minimum material thickness 1,5 mm.

Standards: DIN EN 59, ASTM D 2583

HPE II Barcol

The handheld design allows the HPE II Barcol to be used for measurements in a non-laboratory setting, and about 0.6kg of weight makes it easier to carry around.

 

Size and Weight

 

Method Barcol

Range of application Hardness determination on fiberglass rein-forced plastics,
thermoset material, hard thermoplastic resin, aluminium etc.
minimum material thickness 1,5 mm
Standards DIN EN 59, ASTM D 2583
Basic equipment Barcol, Stabilisation ring
Measuring principle The indenter of the instrument penetrates the specimen from the surface. This indentation depth provides the hardness information of the test specimen.
Technical Data Memory for 300 measured values Lithium battery 3.6V with approx. 2000 hours operating time Data output RS 232 Measurement: LxWxH 190 x 70 x 40 mm Weight 600 g

 

This measurement model applies to more rigid objects such as fiberglass, reinforced plastics, thermoplastic, or aluminum alloys

Measure hardness on fiberglass reinforced plastics, thermoset material, hard thermoplastic resin, aluminum etc. Minimum material thickness 1,5 mm.

Standards: DIN EN 59, ASTM D 2583

HPE II Barcol

The handheld design allows the HPE II Barcol to be used for measurements in a non-laboratory setting, and about 0.6kg of weight makes it easier to carry around.

 

Size and Weight

 

Method Barcol

Range of application Hardness determination on fiberglass rein-forced plastics,
thermoset material, hard thermoplastic resin, aluminium etc.
minimum material thickness 1,5 mm
Standards DIN EN 59, ASTM D 2583
Basic equipment Barcol, Stabilisation ring
Measuring principle The indenter of the instrument penetrates the specimen from the surface. This indentation depth provides the hardness information of the test specimen.
Technical Data Memory for 300 measured values Lithium battery 3.6V with approx. 2000 hours operating time Data output RS 232 Measurement: LxWxH 190 x 70 x 40 mm Weight 600 g