Complete Non-Destructive Roof Moisture Survey Kit for Leak Tracing and Condition Assessment
Comprehensive Moisture Inspection for Roofing Professionals
The Tramex Roofing Master Kit RMK combines the instruments and probes needed for comprehensive moisture investigation of flat roofing, waterproofing systems, concrete decks and wood-based roofing materials. The kit supports both continuous roof surveying and detailed point-of-contact investigation, helping inspectors locate elevated moisture conditions, trace suspected leaks and document roof condition without unnecessary destructive testing.
At the core of the kit are the Tramex Dec Scanner, RWS Roof & Wall Scanner and CMEX5 Concrete Moisture Encounter X5. Together they provide multiple levels of investigation, from rapid large-area roof surveys to localized non-destructive moisture measurement, pin-probe testing, relative humidity assessment and surface-temperature measurement.
Kit Contents
- Dec Scanner
- RWS – Roof and Wall Scanner + telescopic handle (for use on roofs)
- Concrete Moisture Encounter X5 – CMEX5
- App available for Android and iOS (phone not included)
- Hand-held electrode with 7.8″ (200mm) insulated pins
- 10″ (260mm) narrow RH probe
- Hole punch
- Infrared Thermometer
- Extension Handle for CMEX5
Scan Large Roof Areas Without Destructive Testing
The Tramex Dec Scanner is designed for continuous non-destructive surveying of moisture conditions within roofing and waterproofing systems. Its comparative 0–100 scale allows the inspector to identify changes in moisture conditions while moving across the roof surface.
The Dec Scanner can investigate moisture conditions to a comparative maximum depth of approximately 6 inches (152 mm), helping identify suspect areas that can then be examined more closely with the other instruments included in the kit.
Pinpoint Moisture with the RWS Roof & Wall Scanner
The RWS Roof & Wall Scanner provides localized non-destructive moisture detection to a depth of approximately 4 inches (100 mm). Four sensitivity ranges are available, with high and low sensitivity settings for both roofing systems and EIFS / foam roof insulation.
Its telescopic handle allows the RWS to be used while standing, making repeated measurements across roof surfaces more practical and reducing the need for constant bending during a survey.
Measure Concrete Deck Moisture with the CMEX5
The included Tramex CMEX5 Concrete Moisture Encounter X5 provides instant, non-destructive quantitative moisture measurement of concrete. It measures to a depth of approximately ¾ inch (20 mm) and provides concrete moisture-content readings from 0 to 6.9%.
The CMEX5 also provides comparative and equivalent scales for other cementitious materials, a 0–100 reference scale, relative-humidity measurement capability and connection for pin-type probes.
Pin-Probe Testing for Wood and Roofing Materials
A hand-held electrode with 7.8-inch (200 mm) insulated pins is supplied for invasive moisture investigation where depth-specific readings are required. When used with the CMEX5, pin-probe testing provides moisture-content measurement in wood from approximately 5 to 30%.
The insulated pins are particularly useful for investigating moisture beneath the surface because only their exposed tips take the measurement, helping the inspector evaluate moisture conditions at a selected depth.
Relative Humidity and Dew Point Assessment
The supplied 10-inch (260 mm) narrow RH probe extends the kit beyond surface moisture detection. Together with the CMEX5, it allows relative humidity and environmental conditions to be assessed in cavities or other locations where conventional surface measurements may not provide enough information.
Monitoring relative humidity, temperature and dew point can help identify conditions associated with condensation and moisture accumulation within a roofing assembly.
Infrared Surface Temperature Measurement
The included Tramex IRT2 infrared thermometer measures surface temperature without direct contact. Its measurement range extends from -50 to 650°C (-58 to 1202°F), with a 12:1 distance-to-spot ratio and a response time of approximately 150 milliseconds.
Surface-temperature information can complement moisture and ambient-condition measurements when investigating condensation, thermal differences or suspected areas of water intrusion.
Bluetooth Connectivity and Tramex Meters App
Bluetooth connectivity from the CMEX5 allows compatible readings to be viewed and recorded using the Tramex Meters App for Android and iOS devices. The app can be used to:
- View CMEX5 readings remotely on a mobile device
- GeoTag test results
- Add photographs to inspection records
- Create and save reports
- Generate charts
- Share measurement information
- View the meter screen when the CMEX5 is mounted on its extension handle
A smartphone or tablet is not included with the kit.
Supports ASTM D7954 Roof Moisture Surveys
The Roofing Master Kit is designed for roof moisture surveying in accordance with ASTM D7954. The combination of the Dec Scanner, localized RWS measurements and supporting moisture instruments allows roofing professionals to progress from broad-area screening to detailed investigation of suspect locations.
Key Features
- Complete professional roof moisture inspection kit
- Continuous and point-of-contact non-destructive roof surveying
- Dec Scanner penetration up to approximately 6 in (152 mm)
- RWS penetration up to approximately 4 in (100 mm)
- Four RWS sensitivity ranges
- Non-destructive concrete moisture measurement with CMEX5
- Concrete moisture range from 0 to 6.9%
- Pin-probe wood moisture measurement from 5 to 30%
- Relative humidity and environmental-condition measurement
- Non-contact infrared surface-temperature measurement
- Bluetooth connectivity with the Tramex Meters App
- GeoTagged results, photographs, reports and charts
- Extension handles for easier roof surveying
- Heavy-duty wheeled carrying case with die-cut foam
- Designed for use in ASTM D7954 roof moisture surveys
Dec Scanner Specifications
| Specification | Value |
|---|---|
| Measurement Type | Non-destructive comparative roof moisture survey |
| Comparative Range | 0–100 |
| Maximum Comparative Penetration | Up to 6 in (152 mm) |
| Applicable Standard | ASTM D7954 |
| Limitations | Some EPDM, butyl rubber roofing and other electrically conductive roof coverings |
RWS Roof & Wall Scanner Specifications
| Specification | Value |
|---|---|
| Measurement Type | Non-destructive comparative moisture detection |
| Depth of Penetration | Up to 4 in (100 mm) |
| Sensitivity Ranges | 4 |
| Roofing Mode | High and low sensitivity |
| EIFS / Foam Roof Insulation Mode | High and low sensitivity |
CMEX5 Measurement Ranges
| Measurement | Range / Specification |
|---|---|
| Concrete Moisture Content | 0–6.9% |
| Depth of Penetration in Concrete | Approximately ¾ in (20 mm) |
| Gypsum Floor Screed Comparative Scale | 0–12 |
| CM Equivalent – Anhydrite | 0–2.7 |
| CM Equivalent – Concrete | 0–4.3 |
| Reference Scale | 0–100 |
| Relative Humidity | 0–99% RH |
| Wood Moisture with Pin Probe | 5–30% |
IRT2 Infrared Thermometer Specifications
| Specification | Value |
|---|---|
| Temperature Range | -50 to 650°C (-58 to 1202°F) |
| Distance-to-Spot Ratio | 12:1 |
| Response Time | 150 ms |
| Spectral Response | 8–14 µm |
| Emissivity | Adjustable from 0.10 to 1.0 |
| Laser | Class 2, <1 mW, 630–670 nm |
| Operating Temperature | 0 to 50°C (32 to 122°F) |
Kit Contents
- Tramex Dec Scanner
- RWS Roof & Wall Scanner
- Telescopic handle for RWS roof surveying
- CMEX5 Concrete Moisture Encounter X5
- Tramex Meters App for Android and iOS devices
- Hand-held electrode with 7.8 in (200 mm) insulated pins
- 10 in (260 mm) narrow RH probe
- Hole punch
- IRT2 infrared thermometer
- Extension handle for CMEX5
- Heavy-duty wheeled carrying case with die-cut foam lining
Kit Specifications
| Specification | Tramex RMK |
|---|---|
| Product Code | RMK |
| Case Dimensions | 41.2 × 21.1 × 12 in (1045 × 535 × 305 mm) |
| Weight | 59.5 lb (27 kg) |
| Power | 4 × 9 V PP3 batteries and 2 × AA LR6 alkaline batteries |
| Batteries | Included |
Q&A
What is the advantage of having both the Dec Scanner and RWS in the same kit?
The two instruments support different stages of a roof survey. The Dec Scanner is designed for rapid continuous surveying over large roof areas and can detect comparative moisture conditions to approximately 6 inches deep. The RWS provides more localized point-of-contact investigation with sensitivity settings optimized for roofing and foam-insulation systems.
Can the Roofing Master Kit find the exact location of a roof leak?
The kit is designed to identify and trace abnormal moisture conditions within roofing assemblies. Elevated readings can help an inspector narrow the investigation to suspect areas, but the location of trapped moisture does not necessarily identify the exact point where water originally entered the roofing system. Water can migrate within a roof assembly before accumulating.
Can the kit measure moisture in a concrete roof deck?
Yes. The included CMEX5 provides non-destructive concrete moisture-content measurement from 0 to 6.9% to a penetration depth of approximately 20 mm (¾ inch).
Can it measure moisture inside a wood roof deck?
Yes. The hand-held electrode and insulated pins can be connected to the CMEX5 for pin-type moisture measurements in wood. The specified wood moisture-content range is 5–30%.
Why are the long insulated pins useful?
The 200 mm insulated pins allow the probe to penetrate deeper into a roofing or building assembly while restricting the electrical measurement primarily to the exposed pin tips. This helps evaluate moisture conditions at a selected depth rather than only near the surface.
Can the readings be documented electronically?
Yes. Bluetooth connectivity between the CMEX5 and the Tramex Meters App allows compatible results to be recorded on a mobile device. Users can GeoTag measurements, add photographs and create, save and share reports and charts.
Can every roof membrane be scanned non-destructively?
No. Electrically conductive materials can interfere with impedance-based roof scanning. Tramex specifically notes limitations with some EPDM, butyl rubber and other conductive roofing materials. The roofing construction should therefore be considered before selecting the survey method.
Is the kit suitable for ASTM D7954 surveys?
Yes. Tramex identifies the Roofing Master Kit for conducting roof moisture surveys in accordance with ASTM D7954 when the applicable test procedure is followed.
Complete Non-Destructive Roof Moisture Survey Kit for Leak Tracing and Condition Assessment
Comprehensive Moisture Inspection for Roofing Professionals
The Tramex Roofing Master Kit RMK combines the instruments and probes needed for comprehensive moisture investigation of flat roofing, waterproofing systems, concrete decks and wood-based roofing materials. The kit supports both continuous roof surveying and detailed point-of-contact investigation, helping inspectors locate elevated moisture conditions, trace suspected leaks and document roof condition without unnecessary destructive testing.
At the core of the kit are the Tramex Dec Scanner, RWS Roof & Wall Scanner and CMEX5 Concrete Moisture Encounter X5. Together they provide multiple levels of investigation, from rapid large-area roof surveys to localized non-destructive moisture measurement, pin-probe testing, relative humidity assessment and surface-temperature measurement.
Kit Contents
- Dec Scanner
- RWS – Roof and Wall Scanner + telescopic handle (for use on roofs)
- Concrete Moisture Encounter X5 – CMEX5
- App available for Android and iOS (phone not included)
- Hand-held electrode with 7.8″ (200mm) insulated pins
- 10″ (260mm) narrow RH probe
- Hole punch
- Infrared Thermometer
- Extension Handle for CMEX5
Scan Large Roof Areas Without Destructive Testing
The Tramex Dec Scanner is designed for continuous non-destructive surveying of moisture conditions within roofing and waterproofing systems. Its comparative 0–100 scale allows the inspector to identify changes in moisture conditions while moving across the roof surface.
The Dec Scanner can investigate moisture conditions to a comparative maximum depth of approximately 6 inches (152 mm), helping identify suspect areas that can then be examined more closely with the other instruments included in the kit.
Pinpoint Moisture with the RWS Roof & Wall Scanner
The RWS Roof & Wall Scanner provides localized non-destructive moisture detection to a depth of approximately 4 inches (100 mm). Four sensitivity ranges are available, with high and low sensitivity settings for both roofing systems and EIFS / foam roof insulation.
Its telescopic handle allows the RWS to be used while standing, making repeated measurements across roof surfaces more practical and reducing the need for constant bending during a survey.
Measure Concrete Deck Moisture with the CMEX5
The included Tramex CMEX5 Concrete Moisture Encounter X5 provides instant, non-destructive quantitative moisture measurement of concrete. It measures to a depth of approximately ¾ inch (20 mm) and provides concrete moisture-content readings from 0 to 6.9%.
The CMEX5 also provides comparative and equivalent scales for other cementitious materials, a 0–100 reference scale, relative-humidity measurement capability and connection for pin-type probes.
Pin-Probe Testing for Wood and Roofing Materials
A hand-held electrode with 7.8-inch (200 mm) insulated pins is supplied for invasive moisture investigation where depth-specific readings are required. When used with the CMEX5, pin-probe testing provides moisture-content measurement in wood from approximately 5 to 30%.
The insulated pins are particularly useful for investigating moisture beneath the surface because only their exposed tips take the measurement, helping the inspector evaluate moisture conditions at a selected depth.
Relative Humidity and Dew Point Assessment
The supplied 10-inch (260 mm) narrow RH probe extends the kit beyond surface moisture detection. Together with the CMEX5, it allows relative humidity and environmental conditions to be assessed in cavities or other locations where conventional surface measurements may not provide enough information.
Monitoring relative humidity, temperature and dew point can help identify conditions associated with condensation and moisture accumulation within a roofing assembly.
Infrared Surface Temperature Measurement
The included Tramex IRT2 infrared thermometer measures surface temperature without direct contact. Its measurement range extends from -50 to 650°C (-58 to 1202°F), with a 12:1 distance-to-spot ratio and a response time of approximately 150 milliseconds.
Surface-temperature information can complement moisture and ambient-condition measurements when investigating condensation, thermal differences or suspected areas of water intrusion.
Bluetooth Connectivity and Tramex Meters App
Bluetooth connectivity from the CMEX5 allows compatible readings to be viewed and recorded using the Tramex Meters App for Android and iOS devices. The app can be used to:
- View CMEX5 readings remotely on a mobile device
- GeoTag test results
- Add photographs to inspection records
- Create and save reports
- Generate charts
- Share measurement information
- View the meter screen when the CMEX5 is mounted on its extension handle
A smartphone or tablet is not included with the kit.
Supports ASTM D7954 Roof Moisture Surveys
The Roofing Master Kit is designed for roof moisture surveying in accordance with ASTM D7954. The combination of the Dec Scanner, localized RWS measurements and supporting moisture instruments allows roofing professionals to progress from broad-area screening to detailed investigation of suspect locations.
Key Features
- Complete professional roof moisture inspection kit
- Continuous and point-of-contact non-destructive roof surveying
- Dec Scanner penetration up to approximately 6 in (152 mm)
- RWS penetration up to approximately 4 in (100 mm)
- Four RWS sensitivity ranges
- Non-destructive concrete moisture measurement with CMEX5
- Concrete moisture range from 0 to 6.9%
- Pin-probe wood moisture measurement from 5 to 30%
- Relative humidity and environmental-condition measurement
- Non-contact infrared surface-temperature measurement
- Bluetooth connectivity with the Tramex Meters App
- GeoTagged results, photographs, reports and charts
- Extension handles for easier roof surveying
- Heavy-duty wheeled carrying case with die-cut foam
- Designed for use in ASTM D7954 roof moisture surveys
Dec Scanner Specifications
| Specification | Value |
|---|---|
| Measurement Type | Non-destructive comparative roof moisture survey |
| Comparative Range | 0–100 |
| Maximum Comparative Penetration | Up to 6 in (152 mm) |
| Applicable Standard | ASTM D7954 |
| Limitations | Some EPDM, butyl rubber roofing and other electrically conductive roof coverings |
RWS Roof & Wall Scanner Specifications
| Specification | Value |
|---|---|
| Measurement Type | Non-destructive comparative moisture detection |
| Depth of Penetration | Up to 4 in (100 mm) |
| Sensitivity Ranges | 4 |
| Roofing Mode | High and low sensitivity |
| EIFS / Foam Roof Insulation Mode | High and low sensitivity |
CMEX5 Measurement Ranges
| Measurement | Range / Specification |
|---|---|
| Concrete Moisture Content | 0–6.9% |
| Depth of Penetration in Concrete | Approximately ¾ in (20 mm) |
| Gypsum Floor Screed Comparative Scale | 0–12 |
| CM Equivalent – Anhydrite | 0–2.7 |
| CM Equivalent – Concrete | 0–4.3 |
| Reference Scale | 0–100 |
| Relative Humidity | 0–99% RH |
| Wood Moisture with Pin Probe | 5–30% |
IRT2 Infrared Thermometer Specifications
| Specification | Value |
|---|---|
| Temperature Range | -50 to 650°C (-58 to 1202°F) |
| Distance-to-Spot Ratio | 12:1 |
| Response Time | 150 ms |
| Spectral Response | 8–14 µm |
| Emissivity | Adjustable from 0.10 to 1.0 |
| Laser | Class 2, <1 mW, 630–670 nm |
| Operating Temperature | 0 to 50°C (32 to 122°F) |
Kit Contents
- Tramex Dec Scanner
- RWS Roof & Wall Scanner
- Telescopic handle for RWS roof surveying
- CMEX5 Concrete Moisture Encounter X5
- Tramex Meters App for Android and iOS devices
- Hand-held electrode with 7.8 in (200 mm) insulated pins
- 10 in (260 mm) narrow RH probe
- Hole punch
- IRT2 infrared thermometer
- Extension handle for CMEX5
- Heavy-duty wheeled carrying case with die-cut foam lining
Kit Specifications
| Specification | Tramex RMK |
|---|---|
| Product Code | RMK |
| Case Dimensions | 41.2 × 21.1 × 12 in (1045 × 535 × 305 mm) |
| Weight | 59.5 lb (27 kg) |
| Power | 4 × 9 V PP3 batteries and 2 × AA LR6 alkaline batteries |
| Batteries | Included |
Q&A
What is the advantage of having both the Dec Scanner and RWS in the same kit?
The two instruments support different stages of a roof survey. The Dec Scanner is designed for rapid continuous surveying over large roof areas and can detect comparative moisture conditions to approximately 6 inches deep. The RWS provides more localized point-of-contact investigation with sensitivity settings optimized for roofing and foam-insulation systems.
Can the Roofing Master Kit find the exact location of a roof leak?
The kit is designed to identify and trace abnormal moisture conditions within roofing assemblies. Elevated readings can help an inspector narrow the investigation to suspect areas, but the location of trapped moisture does not necessarily identify the exact point where water originally entered the roofing system. Water can migrate within a roof assembly before accumulating.
Can the kit measure moisture in a concrete roof deck?
Yes. The included CMEX5 provides non-destructive concrete moisture-content measurement from 0 to 6.9% to a penetration depth of approximately 20 mm (¾ inch).
Can it measure moisture inside a wood roof deck?
Yes. The hand-held electrode and insulated pins can be connected to the CMEX5 for pin-type moisture measurements in wood. The specified wood moisture-content range is 5–30%.
Why are the long insulated pins useful?
The 200 mm insulated pins allow the probe to penetrate deeper into a roofing or building assembly while restricting the electrical measurement primarily to the exposed pin tips. This helps evaluate moisture conditions at a selected depth rather than only near the surface.
Can the readings be documented electronically?
Yes. Bluetooth connectivity between the CMEX5 and the Tramex Meters App allows compatible results to be recorded on a mobile device. Users can GeoTag measurements, add photographs and create, save and share reports and charts.
Can every roof membrane be scanned non-destructively?
No. Electrically conductive materials can interfere with impedance-based roof scanning. Tramex specifically notes limitations with some EPDM, butyl rubber and other conductive roofing materials. The roofing construction should therefore be considered before selecting the survey method.
Is the kit suitable for ASTM D7954 surveys?
Yes. Tramex identifies the Roofing Master Kit for conducting roof moisture surveys in accordance with ASTM D7954 when the applicable test procedure is followed.
