The Tramex concrete determinator inspector kit is the complete concrete moisture test kit
The complete kit for instant and precise testing of both Surface and In-Body concrete Moisture Content in floors and slabs using a unified gravimetric-based testing method. The Tramex CMEX5 digital moisture meter allows for non-destructive quantitative testing of concrete and comparative testing per ASTM F2659.
The reusable Concrete Moisture Determinator Probe used with the CMEX5 allows for in-depth moisture content probe testing within the concrete, down to an extendable depth of up to 4″ (100mm) and a diameter of 3/4” (19mm). The CMEX5 also incorporates reusable plug-in Hygro-i2 ® RH probes for in-situ testing of concrete. An infrared surface thermometer gives surface temperature and dew point conditions when used in conjunction with the CMEX5 hygrometer. The Concrete Determinator Inspector Kit comes in a protective heavy-duty carrying case with die-cut foam lining.
The Tramex Meters App allows you to GeoTag test results, create, save, and share reports and charts, as well as see your meter screen on your phone when using the CMEX5 extension handle.
Kit Contents
- Concrete Moisture Encounter X5 – CMEX5
- Free App available for Android and iOS (phone not included)
- Concrete Moisture Determinator Probe
- 1 x Hygro-i2 ® Reusable Relative Humidity probe
- Calibration Check Plate
- Infrared Thermometer
- Hole liners
- Extension Handle
CONCRETE MOISTURE ENCOUNTER X5 – CMEX5 – MEASURING RANGE:
| Depth of penetration in concrete: | approx. ¾” (20mm) |
| Moisture content for Concrete: | 0 → 6.9 % |
| Comparative for Gypsum floor screed: | 0 → 12 |
| CM Equiv Anhydrite/Concrete: | 0→2.7 / 0→4.3 |
| Reference scale: | 0 → 100 |
| Relative Humidity: | 0 → 99% |
| (with optional Hygro-i2 ® probe): | Humidity accuracy: 0% → 99%RH +/- 2% @ 25°C / 77°F |
| Moisture content for wood (with optional wood pin probes): | 5 → 30 % |
CONCRETE MOISTURE PROBE ‘THE DETERMINATOR’ – MEASURING RANGE:
| Moisture Content for Concrete with Tramex CMEX5: | 0 – 6.9% |
| Depth of Penetration: | 1 1/4” probe depth for concrete between 2” to 4” |
| 2 1/4” probe depth for concrete between 4” to 6” | |
| 3 1/4” probe depth for concrete between 6” to 9” | |
| 4 1/4” probe depth for concrete between 9” to 11” |
INFRARED THERMOMETER IRT2
| Temperature range: | -58ºF ~ 1202ºF (-50 to 650 ºC) |
| Distance to Spot ratio: | D:S = 12:1 |
| Display resolution: | 0.1 ºF(0.1ºC) <1000 1ºC >1000 |
| Accuracy for targets: | Assumes ambient operating temperature of 73 to 77ºF (23 to 25 ºC) -58ºF ~ 68ºF (-50 ~ 20ºC)
±4.5ºF (2.5ºC) 68ºF ~572ºF (20ºC ~300ºC) ±1.0% ± 1.8ºF (1.0ºC) 572ºF ~ 1202ºF (300ºC ~650ºC) ±1.5% |
| Repeatability: | -58~68ºF (-50~20ºC) : ± 2.3ºF (1.3ºC) 68~1202ºF (20~650ºC) : ±0.5% or ±0.9ºF (0.5ºC) |
| Response time: | 150ms |
| Spectral response: | 8~14um |
| Emissivity: | Digitally adjustable from 0.10 to 1.0 |
| Over range indication: | LCD will show “—-” |
| Polarity: | Automatic (no indication for positive polarity); Minus (-) sign for negative polarity |
| Diode laser output: | <1mW,Wavelength 630~670nm, Class 2 laser product |
| Operating temp.: | 32 to 122ºF ( 0 to 50ºC) |
| Storage temp.: | 14 to 140ºF (–10 to 60ºC) |
| Relative humidity: | 10%~90%RH operating, <80%RH storage |
| Power supply: | 9V battery, NEDA 1604A or IEC 6LR61, or equivalent |
| Safety: | “ CE ” Comply with EMC |
SPECIFICATIONS OF KIT:
| Size: | 17.1” x 14.2” x 5.5” (43.5cm x 36cm x 14cm) |
| Weight: | 7.9 lbs (3.6 kg) |
| Power: | 2 x AA batteries, 1 x 9 volt PP3 battery |
The Tramex concrete determinator inspector kit is the complete concrete moisture test kit
The complete kit for instant and precise testing of both Surface and In-Body concrete Moisture Content in floors and slabs using a unified gravimetric-based testing method. The Tramex CMEX5 digital moisture meter allows for non-destructive quantitative testing of concrete and comparative testing per ASTM F2659.
The reusable Concrete Moisture Determinator Probe used with the CMEX5 allows for in-depth moisture content probe testing within the concrete, down to an extendable depth of up to 4″ (100mm) and a diameter of 3/4” (19mm). The CMEX5 also incorporates reusable plug-in Hygro-i2 ® RH probes for in-situ testing of concrete. An infrared surface thermometer gives surface temperature and dew point conditions when used in conjunction with the CMEX5 hygrometer. The Concrete Determinator Inspector Kit comes in a protective heavy-duty carrying case with die-cut foam lining.
The Tramex Meters App allows you to GeoTag test results, create, save, and share reports and charts, as well as see your meter screen on your phone when using the CMEX5 extension handle.
Kit Contents
- Concrete Moisture Encounter X5 – CMEX5
- Free App available for Android and iOS (phone not included)
- Concrete Moisture Determinator Probe
- 1 x Hygro-i2 ® Reusable Relative Humidity probe
- Calibration Check Plate
- Infrared Thermometer
- Hole liners
- Extension Handle
CONCRETE MOISTURE ENCOUNTER X5 – CMEX5 – MEASURING RANGE:
| Depth of penetration in concrete: | approx. ¾” (20mm) |
| Moisture content for Concrete: | 0 → 6.9 % |
| Comparative for Gypsum floor screed: | 0 → 12 |
| CM Equiv Anhydrite/Concrete: | 0→2.7 / 0→4.3 |
| Reference scale: | 0 → 100 |
| Relative Humidity: | 0 → 99% |
| (with optional Hygro-i2 ® probe): | Humidity accuracy: 0% → 99%RH +/- 2% @ 25°C / 77°F |
| Moisture content for wood (with optional wood pin probes): | 5 → 30 % |
CONCRETE MOISTURE PROBE ‘THE DETERMINATOR’ – MEASURING RANGE:
| Moisture Content for Concrete with Tramex CMEX5: | 0 – 6.9% |
| Depth of Penetration: | 1 1/4” probe depth for concrete between 2” to 4” |
| 2 1/4” probe depth for concrete between 4” to 6” | |
| 3 1/4” probe depth for concrete between 6” to 9” | |
| 4 1/4” probe depth for concrete between 9” to 11” |
INFRARED THERMOMETER IRT2
| Temperature range: | -58ºF ~ 1202ºF (-50 to 650 ºC) |
| Distance to Spot ratio: | D:S = 12:1 |
| Display resolution: | 0.1 ºF(0.1ºC) <1000 1ºC >1000 |
| Accuracy for targets: | Assumes ambient operating temperature of 73 to 77ºF (23 to 25 ºC) -58ºF ~ 68ºF (-50 ~ 20ºC)
±4.5ºF (2.5ºC) 68ºF ~572ºF (20ºC ~300ºC) ±1.0% ± 1.8ºF (1.0ºC) 572ºF ~ 1202ºF (300ºC ~650ºC) ±1.5% |
| Repeatability: | -58~68ºF (-50~20ºC) : ± 2.3ºF (1.3ºC) 68~1202ºF (20~650ºC) : ±0.5% or ±0.9ºF (0.5ºC) |
| Response time: | 150ms |
| Spectral response: | 8~14um |
| Emissivity: | Digitally adjustable from 0.10 to 1.0 |
| Over range indication: | LCD will show “—-” |
| Polarity: | Automatic (no indication for positive polarity); Minus (-) sign for negative polarity |
| Diode laser output: | <1mW,Wavelength 630~670nm, Class 2 laser product |
| Operating temp.: | 32 to 122ºF ( 0 to 50ºC) |
| Storage temp.: | 14 to 140ºF (–10 to 60ºC) |
| Relative humidity: | 10%~90%RH operating, <80%RH storage |
| Power supply: | 9V battery, NEDA 1604A or IEC 6LR61, or equivalent |
| Safety: | “ CE ” Comply with EMC |
SPECIFICATIONS OF KIT:
| Size: | 17.1” x 14.2” x 5.5” (43.5cm x 36cm x 14cm) |
| Weight: | 7.9 lbs (3.6 kg) |
| Power: | 2 x AA batteries, 1 x 9 volt PP3 battery |
