This cost-effective modular semi-automatic hardness tester can easily test samples like O rings, seals, and tube-shaped elastomers.
Range of application IRHD M
Hardness determination on hoses and tubes, O-rings, molded parts, reference plates, and sealing. Minimum material thickness of 0,6 mm
Range of application IRHD N
Hardness determination on the soft rubber, highly elastic materials, and plastically deformable materials. Minimum material thickness of 6,0 mm
By means of interchangeable measuring devices for methods IRHD M and IRHD N, soft elastomers with a thickness of up to 0.6mm are easily tested with highly reliable results. The contact pressure and measuring time of this hardness tester are according to international standards. Hardness Tester IRHD Compact III has the capacity to store up to 300 test results and comes with interchangeable probes according to the requirements of the operator. The optional “BareissOne” windows-based software offers data logging, management of articles, display of graphics and hardness curves, statistical evaluation, and further analysis of the measured values.
Characteristics
1) The unit consists of an electronic display along with a resolution of up to 0.1 IRHD
2) Data transmission can be done with an RS-232 interface.
3) Interchangeable probes from Micro to normal depending on the sample used to test
4) IRHD Compact III hardness tester is a semi-automatic hardness measuring instrument that is very cost-effective
5) O rings, seals, and tube-shaped samples can easily be tested with the help of special fixtures that attach to the instrument.
6) The embedded memory is used to store up to 300 test results as well as optical and acoustic signals during the measuring process.
Standards: DIN ISO 48, ASTM D 1415, NFT 46-003, BS903 Part A 26
IRHD Compact II features embedded memory for saving up to 300 test results as well as optical and acoustic signals during the measuring process.
Basic Equipment
Electronic display, RS 232 Data transmitter, Interchangeable probe
Testing Methods
IRHD Micro, IRHD Normal
Standards
ISO 48-2| NF ISO 48| DIN 53512| ASTM D 1415| ASTM D792
ISO/17025 Accredited Calibration Certificate
Official ISO/17025 accredited calibration certificate is available for IRHD M & IRHD N
IRDH Compact III
The advantages of IRHD Compact III: If needed, the IRHD M or IRHD N indenters can easily be exchanged by the customer. For calibration, certification, and evaluation of the instrument, only the measuring head needs to be returned to our Laboratory. Please use the original transport case when sending the device to Bareiss, while the test stand remains with the customer.
Resolution: 0,1 IRHD M / 0,1 IRHD N
Range of application: hoses, tubes, O-rings, molded parts, norm plates, and seals
Minimum material thickness – IRHD M: 0,6 – 5,0 mm
Minimum material thickness – IRHD N: 6,0 – 10,0 mm
Size and Weight
Method Micro
Method Normal
| Dimensions | LxWxH [mm] | Weights |
| Test stand | 200 x 250 x 570 | 9,0 kg |
| Pick-up bracket IRHD N | 100 x 100 x 150 | 1,3 kg |
| Measuring device IRHD N | 70 x 90 x 150 | 1,9 kg |
| Measuring device IRHD M | 160 x 100 x 140 | 1,4 kg |
READ AN EXHAUSTIVE ARTICLE ABOUT THIS PRODUCT ON OUR BLOG
This cost-effective modular semi-automatic hardness tester can easily test samples like O rings, seals, and tube-shaped elastomers.
Range of application IRHD M
Hardness determination on hoses and tubes, O-rings, molded parts, reference plates, and sealing. Minimum material thickness of 0,6 mm
Range of application IRHD N
Hardness determination on the soft rubber, highly elastic materials, and plastically deformable materials. Minimum material thickness of 6,0 mm
By means of interchangeable measuring devices for methods IRHD M and IRHD N, soft elastomers with a thickness of up to 0.6mm are easily tested with highly reliable results. The contact pressure and measuring time of this hardness tester are according to international standards. Hardness Tester IRHD Compact III has the capacity to store up to 300 test results and comes with interchangeable probes according to the requirements of the operator. The optional “BareissOne” windows-based software offers data logging, management of articles, display of graphics and hardness curves, statistical evaluation, and further analysis of the measured values.
Characteristics
1) The unit consists of an electronic display along with a resolution of up to 0.1 IRHD
2) Data transmission can be done with an RS-232 interface.
3) Interchangeable probes from Micro to normal depending on the sample used to test
4) IRHD Compact III hardness tester is a semi-automatic hardness measuring instrument that is very cost-effective
5) O rings, seals, and tube-shaped samples can easily be tested with the help of special fixtures that attach to the instrument.
6) The embedded memory is used to store up to 300 test results as well as optical and acoustic signals during the measuring process.
Standards: DIN ISO 48, ASTM D 1415, NFT 46-003, BS903 Part A 26
IRHD Compact II features embedded memory for saving up to 300 test results as well as optical and acoustic signals during the measuring process.
Basic Equipment
Electronic display, RS 232 Data transmitter, Interchangeable probe
Testing Methods
IRHD Micro, IRHD Normal
Standards
ISO 48-2| NF ISO 48| DIN 53512| ASTM D 1415| ASTM D792
ISO/17025 Accredited Calibration Certificate
Official ISO/17025 accredited calibration certificate is available for IRHD M & IRHD N
IRDH Compact III
The advantages of IRHD Compact III: If needed, the IRHD M or IRHD N indenters can easily be exchanged by the customer. For calibration, certification, and evaluation of the instrument, only the measuring head needs to be returned to our Laboratory. Please use the original transport case when sending the device to Bareiss, while the test stand remains with the customer.
Resolution: 0,1 IRHD M / 0,1 IRHD N
Range of application: hoses, tubes, O-rings, molded parts, norm plates, and seals
Minimum material thickness – IRHD M: 0,6 – 5,0 mm
Minimum material thickness – IRHD N: 6,0 – 10,0 mm
Size and Weight
Method Micro
Method Normal
| Dimensions | LxWxH [mm] | Weights |
| Test stand | 200 x 250 x 570 | 9,0 kg |
| Pick-up bracket IRHD N | 100 x 100 x 150 | 1,3 kg |
| Measuring device IRHD N | 70 x 90 x 150 | 1,9 kg |
| Measuring device IRHD M | 160 x 100 x 140 | 1,4 kg |
READ AN EXHAUSTIVE ARTICLE ABOUT THIS PRODUCT ON OUR BLOG
