The body is made of strong and light aluminum alloy. The contact pressure value provided by this instrument is completely in accordance with the official standard, and the measurement time can be adjusted to 0-99 seconds.
Please view the table below for its many uses
Constant contact pressure and measuring time acc. to standards – optical and acoustical signal, serial interface, and PC-cable.
The chassis of HPE II is made of aluminum which provides lightweight and durability.
Bareiss HPE II Series is available in different Shore scales and with the possibility of an additional standing piece, making measuring on curvature just as easy.
The battery lasts about 2000 working hours.
HPE ll & BS 61 II
Amenities of the HPE II
The measured data storage allows storing 300 results. After the measurement is done, the result will be saved automatically. The display will show “M” for memory.
The saved data can be transferred with a data output RS 232 to a PC. A USB adapter is available additionally.
Test Method
Shore A / A0 / B / 0 / C / D / D0 / 00 / 000 / 000S / E / L/c
Standards
DIN ISO 7619 / DIN EN ISO 868 / NF EN ISO 868 / ASTM D 2240 / SRIS 0101
Specifications
| Measuring Method | Range of applications | Standards | Minimum material thickness [mm] |
| Shore A | soft rubber, elastomers, natural rubber products, neoprene, casting resin, polyester, soft PVC, leather, pressure rollers, etc … | DIN EN ISO 868 | 4 |
| DIN ISO 7619, ASTM D 2240, NFT 51-174, BS903 Part. A26 | 6 | ||
| Asker C | with Shore A | SRIS 0101, JIS K 7312,
ABNT NBR 14455 |
6 |
| Shore A0 | PUR-foam Leather coating | DIN ISO 7619 | 6 |
| Shore E | PUR-foam Leather coating | ASTM D 2240 | 6 |
| L/c | PUR-foam Leather coating | PV 3931 | 6 |
| Shore D | hard rubber, hard plastics, acrylic glass, polystyrene, rigid thermoplastics, Resopal, pressure rollers, Vinyl plates, cellulose-Acetate, etc. | DIN EN ISO 868 | 4 |
| DIN ISO 7619, ASTM D 2240, NFT 51-174, BS903 Part. A26 | 6 | ||
| Asker CS | like Shore D | SRIS 0101 | 6 |
| Shore B | middle hard materials from rubber, typewriter roles, flat materials | ASTM D 2240 | 6 |
| Shore C | Plastics and middle hard rubber materials | ASTM D 2240 | 6 |
| Shore D0 | Plastics and middle hard rubber materials | ASTM D 2240 | 6 |
| Shore 0 | soft elastic materials, pressure rolls, middle firm, textile fabrics, nylon, orlon, perlon, rayon | ASTM D 2240 | 6 |
| Shore 00
Shore 000 |
moss- and cell rubber, foam rubber, silicone | ASTM D 2240 | 6 |
| Shore 000 S | moss- and cell rubber, foam rubber, silicone | ASTM D 2240 | 6 |
| Shore AM | like Shore A
(Test stand BSA 400 mandatory) |
DIN ISO 7619 | 1,5 |
| Shore M | like Shore A
(Test stand BSA 400 mandatory) |
ASTM D 2240 | 1,25 |
For more information, please see Instruction Manual
The body is made of strong and light aluminum alloy. The contact pressure value provided by this instrument is completely in accordance with the official standard, and the measurement time can be adjusted to 0-99 seconds.
Please view the table below for its many uses
Constant contact pressure and measuring time acc. to standards – optical and acoustical signal, serial interface, and PC-cable.
The chassis of HPE II is made of aluminum which provides lightweight and durability.
Bareiss HPE II Series is available in different Shore scales and with the possibility of an additional standing piece, making measuring on curvature just as easy.
The battery lasts about 2000 working hours.
HPE ll & BS 61 II
Amenities of the HPE II
The measured data storage allows storing 300 results. After the measurement is done, the result will be saved automatically. The display will show “M” for memory.
The saved data can be transferred with a data output RS 232 to a PC. A USB adapter is available additionally.
Test Method
Shore A / A0 / B / 0 / C / D / D0 / 00 / 000 / 000S / E / L/c
Standards
DIN ISO 7619 / DIN EN ISO 868 / NF EN ISO 868 / ASTM D 2240 / SRIS 0101
Specifications
| Measuring Method | Range of applications | Standards | Minimum material thickness [mm] |
| Shore A | soft rubber, elastomers, natural rubber products, neoprene, casting resin, polyester, soft PVC, leather, pressure rollers, etc … | DIN EN ISO 868 | 4 |
| DIN ISO 7619, ASTM D 2240, NFT 51-174, BS903 Part. A26 | 6 | ||
| Asker C | with Shore A | SRIS 0101, JIS K 7312,
ABNT NBR 14455 |
6 |
| Shore A0 | PUR-foam Leather coating | DIN ISO 7619 | 6 |
| Shore E | PUR-foam Leather coating | ASTM D 2240 | 6 |
| L/c | PUR-foam Leather coating | PV 3931 | 6 |
| Shore D | hard rubber, hard plastics, acrylic glass, polystyrene, rigid thermoplastics, Resopal, pressure rollers, Vinyl plates, cellulose-Acetate, etc. | DIN EN ISO 868 | 4 |
| DIN ISO 7619, ASTM D 2240, NFT 51-174, BS903 Part. A26 | 6 | ||
| Asker CS | like Shore D | SRIS 0101 | 6 |
| Shore B | middle hard materials from rubber, typewriter roles, flat materials | ASTM D 2240 | 6 |
| Shore C | Plastics and middle hard rubber materials | ASTM D 2240 | 6 |
| Shore D0 | Plastics and middle hard rubber materials | ASTM D 2240 | 6 |
| Shore 0 | soft elastic materials, pressure rolls, middle firm, textile fabrics, nylon, orlon, perlon, rayon | ASTM D 2240 | 6 |
| Shore 00
Shore 000 |
moss- and cell rubber, foam rubber, silicone | ASTM D 2240 | 6 |
| Shore 000 S | moss- and cell rubber, foam rubber, silicone | ASTM D 2240 | 6 |
| Shore AM | like Shore A
(Test stand BSA 400 mandatory) |
DIN ISO 7619 | 1,5 |
| Shore M | like Shore A
(Test stand BSA 400 mandatory) |
ASTM D 2240 | 1,25 |
For more information, please see Instruction Manual
