This Portable multi gas detector detects combustible gases (LEL), hydrogen sulfide (H2S), carbon monoxide (CO), and oxygen (O2).
A New Option in Portable Gas Detection
Twice a day, every day… that’s how often you have to charge most portable gas detectors, until now. Introducing the Multi Gas Clip Pump (MGC Pump) from Gas Clip Technologies, the only portable multi gas detector with an internal sampling pump that can go an entire workweek without a charge.
A Long-Lasting Family Tradition
The MGC Pump follows in the long line of portable gas detectors by Gas Clip Technologies that last and last and last. Being able to go a long time between charges is a family tradition.
The Secret to a Long Life
Like our MGC, the MGC Pump uses low-power photometric technology to detect combustible gases (LEL) rather than age-old pellistor technology. The MGC Pump uses an IR source which conserves power and helps the battery last and last.
Ergonomic Design Makes for a Good Fit
The MGC Pump is also designed for comfort. The reduced, sloping shape of the holding area at the bottom of the instrument makes the MGC Pump a comfortable fit in the hands of your workers. It is fully submersible and simple to operate. The MGC Pump offers a one-button design and the largest LCD screen in the industry so it’s easy to read.
Calibrate the MGC Pump Once Every 12 Months
Other multi-gas detectors require calibration anywhere from 1 to 3 months. The MGC Pump can go 6 months without being calibrated.This is an added benefit of IR sensing technology because IR is immune to pellistor sensor poisons such as silicone or H2S.
Features:
- 5 day battery life (continuous run time)
- 1 year calibration cycle
- Will work in inert environments, no need for oxygen
- Pull from over 75 feet
- Stainless steel inlet
Specifications
| Size | 5.7 x 3.0 x 1.5 in. (147 x 78 x 38.3 mm.) | ||
| Weight | 12.4 oz. (352g) | ||
| Temperature | -4˚ to +122˚F (-20˚ to +50˚C) | ||
| Humidity | 5% to 100% RH (non-condensing) | ||
| Battery Life | 5 days continuous Pellistor: 30 hours continuous |
||
| Charge Time | 4 – 6 hours | ||
| Alarms | Visual, Vibrating, Audible (minimum 95 dB) Low, High, STEL, TWA and OL (Over Limit), Pump |
||
| LEDs | 4 red alarm bar LEDs Yellow backlight (activated on button press) Red backlight (activated on alarm condition) Yellow Maintenance Notification LED |
||
| Display | Alphanumeric Liquid Crystal Display (LCD) | ||
| Logs | 25 Bump tests 25 Events 25 Calibrations Continuous 1-second data logging (> 2-month typical capacity) |
||
| Test | Full function self-test upon activation Sensors, battery and circuitry conditions |
||
| Ingress Protection | IP 67 | ||
| Gas Inlet | 1/8” barbed fitting | ||
| Certifications and Approvals | CSA: | Class1, Division 1, Group A, B, C and D Class 1, Zone 0, AEx ia IIC T4 Ga C22.2 No.’s 0, 152, 157 Ex ia IIC T4 Ga |
|
| IECEx: (pending) |
IECEx CSA xx.xxxxx IEC 60079-0:2011, 60079-11:2011, 60079-26:2006 |
||
| ATEX: (pending) |
SIRA 13 ATEX *****X CE II 1 G Ex ia IIC T4 Ga EN 60079-0:2012, 60079-11:2012, 60079-26:2007 EN50270 ANSI/ISA S12.13.01 |
||
| InMetro: (pending) |
UL-913 NCC xx-xxxxx Ex ia IIC T4 Ga (-20°C ≤ Ta ≤ 50°C) |
||
| Pump Draw | Sample from up to 75 ft (23 m) | ||
| Warranty | Full 2 years | ||
| Gases | H2S | 0 – 100 PPM (0.1 PPM increments) | |
| CO | 0 – 500 PPM (1 PPM increments) | ||
| Combustible gas | 0 – 100% LEL (0.1% LEL increments) | ||
| O2 | 0 – 30% vol. (0.1% vol. increments) | ||
| Sensor Type | H2S, CO, O2: Single plug-in electrochemical cell Combustible: Plug-in infrared (IR) or pellistor |
||
| User Options | User message | Maintenance notification | |
| TWA/STEL intervals | TWA method | ||
| Languages (6) | Sensor enable/disable | ||
| Pump test | SAFE display | ||
| Self-Test lock | Dock lock | ||
| Auto-zero on start up | Calibration gas | ||
| Bump test interval | Calibration interval | ||
| Low/High alarm | TWA/STEL alarm | ||
This Portable multi gas detector detects combustible gases (LEL), hydrogen sulfide (H2S), carbon monoxide (CO), and oxygen (O2).
A New Option in Portable Gas Detection
Twice a day, every day… that’s how often you have to charge most portable gas detectors, until now. Introducing the Multi Gas Clip Pump (MGC Pump) from Gas Clip Technologies, the only portable multi gas detector with an internal sampling pump that can go an entire workweek without a charge.
A Long-Lasting Family Tradition
The MGC Pump follows in the long line of portable gas detectors by Gas Clip Technologies that last and last and last. Being able to go a long time between charges is a family tradition.
The Secret to a Long Life
Like our MGC, the MGC Pump uses low-power photometric technology to detect combustible gases (LEL) rather than age-old pellistor technology. The MGC Pump uses an IR source which conserves power and helps the battery last and last.
Ergonomic Design Makes for a Good Fit
The MGC Pump is also designed for comfort. The reduced, sloping shape of the holding area at the bottom of the instrument makes the MGC Pump a comfortable fit in the hands of your workers. It is fully submersible and simple to operate. The MGC Pump offers a one-button design and the largest LCD screen in the industry so it’s easy to read.
Calibrate the MGC Pump Once Every 12 Months
Other multi-gas detectors require calibration anywhere from 1 to 3 months. The MGC Pump can go 6 months without being calibrated.This is an added benefit of IR sensing technology because IR is immune to pellistor sensor poisons such as silicone or H2S.
Features:
- 5 day battery life (continuous run time)
- 1 year calibration cycle
- Will work in inert environments, no need for oxygen
- Pull from over 75 feet
- Stainless steel inlet
Specifications
| Size | 5.7 x 3.0 x 1.5 in. (147 x 78 x 38.3 mm.) | ||
| Weight | 12.4 oz. (352g) | ||
| Temperature | -4˚ to +122˚F (-20˚ to +50˚C) | ||
| Humidity | 5% to 100% RH (non-condensing) | ||
| Battery Life | 5 days continuous Pellistor: 30 hours continuous |
||
| Charge Time | 4 – 6 hours | ||
| Alarms | Visual, Vibrating, Audible (minimum 95 dB) Low, High, STEL, TWA and OL (Over Limit), Pump |
||
| LEDs | 4 red alarm bar LEDs Yellow backlight (activated on button press) Red backlight (activated on alarm condition) Yellow Maintenance Notification LED |
||
| Display | Alphanumeric Liquid Crystal Display (LCD) | ||
| Logs | 25 Bump tests 25 Events 25 Calibrations Continuous 1-second data logging (> 2-month typical capacity) |
||
| Test | Full function self-test upon activation Sensors, battery and circuitry conditions |
||
| Ingress Protection | IP 67 | ||
| Gas Inlet | 1/8” barbed fitting | ||
| Certifications and Approvals | CSA: | Class1, Division 1, Group A, B, C and D Class 1, Zone 0, AEx ia IIC T4 Ga C22.2 No.’s 0, 152, 157 Ex ia IIC T4 Ga |
|
| IECEx: (pending) |
IECEx CSA xx.xxxxx IEC 60079-0:2011, 60079-11:2011, 60079-26:2006 |
||
| ATEX: (pending) |
SIRA 13 ATEX *****X CE II 1 G Ex ia IIC T4 Ga EN 60079-0:2012, 60079-11:2012, 60079-26:2007 EN50270 ANSI/ISA S12.13.01 |
||
| InMetro: (pending) |
UL-913 NCC xx-xxxxx Ex ia IIC T4 Ga (-20°C ≤ Ta ≤ 50°C) |
||
| Pump Draw | Sample from up to 75 ft (23 m) | ||
| Warranty | Full 2 years | ||
| Gases | H2S | 0 – 100 PPM (0.1 PPM increments) | |
| CO | 0 – 500 PPM (1 PPM increments) | ||
| Combustible gas | 0 – 100% LEL (0.1% LEL increments) | ||
| O2 | 0 – 30% vol. (0.1% vol. increments) | ||
| Sensor Type | H2S, CO, O2: Single plug-in electrochemical cell Combustible: Plug-in infrared (IR) or pellistor |
||
| User Options | User message | Maintenance notification | |
| TWA/STEL intervals | TWA method | ||
| Languages (6) | Sensor enable/disable | ||
| Pump test | SAFE display | ||
| Self-Test lock | Dock lock | ||
| Auto-zero on start up | Calibration gas | ||
| Bump test interval | Calibration interval | ||
| Low/High alarm | TWA/STEL alarm | ||
