MULTIPARAMETER WATER QUALITY METER (PH / ISE / EC / DO / TURBIDITY)

The HI9829 is a multiparameter water quality meter that monitors up to 14 different water quality parameters.

The microprocessor-based multi-sensor probe allows for the measurement of key parameters including pH, ORP, conductivity, dissolved oxygen, turbidity, ammonium, chloride, nitrate, and temperature. The probe transmits readings digitally with options to log data while disconnected from the meter.

An optional GPS provides location tracking of measurements. Besides, the complete system is simple to set up and easy to use.

This multiparameter water meter is highly customizable and supplied with all necessary accessories, packaged in a durable carrying case.

• Optional GPS provides location tracking of measurements.
• Color-coded, field-replaceable sensors
• Great for environmental, field, and laboratory testing.

Built-in GPS Receiver

1. 12-channel GPS receiver and antenna
2. Tracks location using satellites to within 30 feet
3. Latitude and longitude recorded with readings
4. Location naming for GPS coordinates
5. Distance from the current location to the stored location
6. Hi929829 multiparameter water quality meter software supplied integrates data collected with Google™ maps
   – Measurement readings including GPS coordinates
   – Date and time
   – Named locations and remarks
   – Sample number

HI9829-MULTIPARAMETER WATER QUALITY METER | PH / ISE / EC / DO / TURBIDITY

 

Specifications – HI9829- MULTIPARAMETER WATER QUALITY METER

pH Range	0.00 to 14.00 pH
pH Resolution	0.01 pH
pH Accuracy	±0.02 pH
pH Calibration	automatic one, two, or three points with automatic recognition of five standard buffers (pH 4.01, 6.86, 7.01, 9.18, 10.01) or one custom buffer
mV Range	±600.0 mV
mV Resolution	0.1 mV
mV Accuracy	±0.5 mV
ORP Range	±2000 mV
ORP Resolution	0.1 mV
ORP Accuracy	±1.0 mV
ORP Calibration	automatic at one custom point (relative mV)
EC Range	0 to 200 mS/cm (absolute EC up to 400 mS/cm)
EC Resolution	Manual: 1 µS/cm; 0.001 mS/cm; 0.01 mS/cm; 0.1 mS/cm; 1 mS/cm, Automatic: 1 µS/cm from 0 to 9999 µS/cm; 0.01 mS/cm from 10.00 to 99.99 mS/cm; 0.1 mS/cm from 100.0 to 400.0 mS/cm, Automatic (mS/cm): 0.001 mS/cm from 0.000 to 9.999 mS/cm; 0.01 mS/cm from 10.00 to 99.99 mS/cm; 0.1 mS/cm from 100.0 to 400.0 mS/cm
EC Accuracy	±1% of reading or ±1 µS/cm whichever is greater
EC Calibration	automatic single point, with six standard solutions (84 µS/cm, 1413 µS/cm, 5.00 mS/cm, 12.88 mS/cm, 80.0 mS/cm, 111.8 mS/cm) or custom point
TDS Range	0 to 400000 ppm (mg/L); (the maximum value depends on the TDS factor)
TDS Resolution	Manual: 1 ppm (mg/L); 0.001 ppt (g/L); 0.01 ppt (g/L); 0.1 ppt (g/L); 1 ppt (g/L),Automatic: 1 ppm (mg/L) from 0 to 9999 ppm (mg/L); 0.01 ppt (g/L) from 10.00 to 99.99 ppt (g/L); 0.1 ppt (g/L) from 100.0 to 400.0 ppt (g/L),Automatic ppt (g/L): 0.001 ppt (g/L) from 0.000 to 9.999 ppt (g/L); 0.01 ppt (g/L) from 10.00 to 99.99 ppt (g/L); 0.1 ppt (g/L) from 100.0 to 400.0 ppt (g/L)
TDS Accuracy	±1% of reading or ±1 ppm (mg/L), whichever is greater
TDS Calibration	based on conductivity or salinity calibration
Resistivity Range	0 to 999999 Ω•cm; 0 to 1000.0 kΩ•cm; 0 to 1.0000 MΩ•cm
Resistivity Resolution	dependent on resistivity reading
Resistivity Calibration	based on conductivity calibration
Salinity Range	0.00 to 70.00 PSU
Salinity Resolution	0.01 PSU
Salinity Accuracy	±2% of reading or ±0.01 PSU whichever is greater
Salinity Calibration	based on conductivity calibration
Seawater σ Range	0.0 to 50.0 σt, σ₀, σ₁₅
Seawater σ Resolution	0.1 σt, σ₀, σ₁₅
Seawater σ Accuracy	±1 σt, σ₀, σ₁₅
Seawater σ Calibration	based on conductivity or salinity calibration
Ammonium-Nitrogen Range	0.02 to 200.0 ppm Am (as NH4 +-N)
Ammonium-Nitrogen Resolution	0.01 ppm to 1 ppm 0.1 ppm to 200.0 ppm
Ammonium-Nitrogen Accuracy	±5 % reading or 2 ppm
Ammonium-Nitrogen Calibration	1 or 2 point, 10 ppm and 100 ppm
Chloride Range	0.6 to 200.0 ppm Cl (as Cl- )
Chloride Resolution	0.01 ppm to 1 ppm 0.1 ppm to 200.0 ppm
Chloride Accuracy	±5 % of reading or 2 ppm
Chloride Calibration	1 or 2 point, 10 ppm and 100 ppm
Nitrate-Nitrogen Range	0.62 to 200.0 ppm Ni (as NO3 – -N)
Nitrate-Nitrogen Resolution	0.01 ppm to 1 ppm 0.1 ppm to 200 ppm
Nitrate-Nitrogen Accuracy	±5 % of reading or 2 ppm
Nitrate-Nitrogen Calibration	1 or 2 point, 10 ppm and 100 ppm
Turbidity Range	0.0 to 99.9 FNU; 100 to 1000 FNU
Turbidity Resolution	0.1 FNU from 0.0 to 99.9 FNU 1 FNU from 100 to 1000 FNU
Turbidity Accuracy	±0.3 FNU or ±2 % of reading, whichever is greater
Turbidity Calibration	Automatic 1, 2, or, 3 points at 0, 20 and 200 FNU, or custom
DO Range	0.0 to 500.0%; 0.00 to 50.00 ppm (mg/L)
DO Resolution	0.1%; 0.01 ppm (mg/L)
DO Accuracy	0.0 to 300.0% saturation: ±1.5% of reading or ±1.0% saturation whichever is greater, 0.00 to 30.00 ppm (mg/L): ±1.5% of reading or ±0.10 ppm (mg/L),whichever is greater, 30.00 ppm (mg/L) to 50.00 ppm (mg/L): ±3% of reading, 300.0 to 500.0% saturation: ±3% of reading
DO Calibration	automatic one or two points at 0 and 100% or one custom point
Atmospheric Pressure Range	450 to 850 mm Hg; 17.72 to 33.46 in Hg; 600.0 to 1133.2 mbar; 8.702 to 16.436 psi; 0.5921 to 1.1184 atm; 60.00 to 113.32 kPa
Atmospheric Pressure Resolution	0.1 mm Hg; 0.01 in Hg; 0.1 mbar; 0.001 psi; 0.0001 atm; 0.01 kPa
Atmospheric Pressure Accuracy	±3 mm Hg within ±15°C from the temperature during calibration
Atmospheric Pressure Calibration	automatic at one custom point
Temperature Range	-5.00 to 55.00 °C, 23.00 to 131.00 °F, 268.15 to 328.15 K
Temperature Resolution	0.01 K, 0.01 °C, 0.01 °F
Temperature Accuracy	±0.15 °C; ±0.27 °F; ±0.15 K
Temperature Calibration	automatic at one custom point
Temperature Compensation	automatic from -5 to 55 °C (23 to 131 °F)
Logging Memory	44,000 records (continuous logging or log-on-demand of all parameters)
Logging Interval	one second to three hours
PC Connectivity	USB (with HI 929829 software)
Battery Type/Life	1.2V (4) NiMH, rechargeable batteries, size C type; up to 140 hours depending on configuration
Waterproof Protection	IP67
Environment	0 to 50°C (32 to 122°F); RH max 100%
Dimensions	221 x 115 x 55 mm (8.7 x 4.5 x 2.2”)
Weight	750 g (26.5 oz.)
GPS	12 channel receiver 10 m (30 ft) accuracy
Ordering Information	The HI9829 and HI98290 (GPS model) are supplied with a HI710140 hard carrying case, HI7612VDC adapter, HI7698292 probe maintenance kit, HI929829 PC application software, HI7698291 USB cable (PC to meter),HI710045 power supply cable, HI710046 cigarette lighter power cable, HI9828-25 quick calibration solution, HI920005 iButton with holder (5),HI7609829-1 pH/ORP sensor, HI7609829-2 galvanic DO sensor, HI7609829-3 EC sensor, HI7698290 short calibration beaker, HI7698295 short protective weighted shield, NiMH rechargeable “C” cell batteries (4),12VDC power adapter, and instruction manual. Probes selected with turbidity option will include the HI7609829-4 EC/turbidity sensor, HI7698293 long calibration beaker and HI7698296 long protective weighted shield in place of the EC sensor, short calibration beaker and short protective shield. Probes selected with turbidity option will also include turbidity calibration solutions (230 ml); HI9829-16 0 FNU, HI769829-17 20 FNU, and HI9829-18 200 FNU.
Warranty	2 years (probe 1 year, sensor 6 months)

 

SPECIFICATIONS	HI9829
Temperature Compensation	automatic from -5 to 55°C (23 to 131°F)
GPS	—
Logging Memory from Meter	44,000 records
Logging Interval	1 second to 3 hours
Computer Interface	USB (with HI 929829 software)
FastTracker™ TAG ID	Yes
Waterproof Protection	IP67
Environment	0 to 50°C (32 to 122°F); RH 100%
Power Supply	1.5V alkaline C cells (4) / 1.2V NiMH rechargeable C cells (4), USB, 12V power adapter
Dimensions	221 x 115 x 55 mm (8.7 x 4.5 x 2.2”)
Weight	750g (26.5 oz.)

Two probes to choose from (Basic or Logging)

The HI7609829 (basic) and HI7629829 (logging) are multiparameter water meter probes for use with the HI9829 portable meter.  It is an option to choose which probe will be supplied with the HI9829 multiparameter water quality meter. By default, the HI9829 and corresponding probe will be supplied with pH/ORP, conductivity, and dissolved oxygen sensors. Therefore, either probe can be upgraded to measure turbidity with a turbidity/conductivity sensor.

HI7609829 Basic Probe

• Digital probe that is less than 2 inches in diameter
• 3 color-coded sensor inputs
• IP68 rating for continuous immersion in water
• Multistrand –multiconductor cable rated for 150 lbs (intermittent use)
• Available with 4, 10, or 20-meter cable
• A weighted shield protects all sensors

HI7609829 probe without logging

• HI7629829 Autonomously Logging Probe
• Same as basic probe but with logging capability
• Logs data independent of HI9829 meter
• Operates on 4 “AA” batteries for up to 70 days*
• Stores up to 140,000 single parameter readings or 35,000 for all parameters
• Logs data from 1 second to 3 hours
• Choose to be supplied with EC or EC/Turbidity sensor
• Supplied with a USB cable for direct connection to Window’s compatible PC

*All channels logging at 10-minute intervals with no averaging

SPECIFICATIONS	HI7609829		HI7629829
Supported Configuration	Connector 1	pH, pH/ORP, ammonium ISE, chloride ISE, nitrate ISE	pH, pH/ORP, ammonium ISE, chloride ISE, nitrate ISE
	Connector 2	dissolved oxygen	dissolved oxygen
	Connector 3	EC	EC
Temperature sensor		built-in	built-in
Autonomous Logging	— yes
Logging Interval	— 1 second to 3 hours
Computer Interface		—	USB (HI76982910)
Memory	— 140,000 measurements (single parameter logged); 35,000 measurements (all parameters logged)
Operating Temperature		-5 to 55°C*	-5 to 55°C*
Maximum Depth		20 m (66’)*	20 m (66’)*
Cable Specification	multistrand-multiconductor shielded cable with internal strength member rated for 68 kg (150 lb.) intermittent use
Wetted Materials	body: ABS; threads: nylon; shield: ABS/316 SS; temperature probe: 316 SS; O-rings: EPDM
Logging Probe Internal Battery Type	— 1.5V (4) AA alkaline
Logging Probe Battery Life Note: Log space must be available for continuous logging	—		Interval all channels logging at 10 min intervals with no averaging
			1-5 seconds 72 hours
			1 minute 22 days
			10 minutes 70 days
Sample Environment		fresh, brackish, seawater	fresh, brackish, seawater
Waterproof Protection		IP68	IP68
Dimensions (without cable)		342 mm (13.5”), dia=46 mm (1.8”)	442 mm (17.4”), dia 46 mm (1.8”)
Weight (with batteries and sensors)		570 g (20.1 oz.)	775 g (27.3 oz.)

* Reduced for ISE sensors

Models

Code	GPS	PROBE	TURBIDITY	CABLE LENGTH
HI9829C4-0	no	basic	no	4
HI9829C10-				10
HI9829C20-				20
HI9829C4T-	no	basic	yes	4
HI9829C10T				10
HI9829C20T				20
HI98292C-0	no	logging	yes	4
HI98294C-0				10
HI98293C-0				20
HI98290C4-	yes	basic	no	4
HI98290C10				10
HI98290C20				20
HI98290C4T	yes	basic	yes	4
HI98290C10T				10
HI98290C20T				20
HI98296C-0	yes	logging	yes	4
HI98298C-0				10
HI98297C-0				20

Color-Coded, Field Replaceable Sensors

Waterproof Protection

The multiparameter water quality meter is enclosed in an IP67 rated waterproof casing and can withstand immersion in water at a depth of 1 m for up to 30 minutes. The probe features an IP68 rating for continuous immersion in water.

Backlit Dot Matrix LCD Display

The HI9829  features a backlit graphic LCD with on-screen help and the capability to display up to twelve parameters simultaneously. The graphic display allows for the use of virtual keys to provide for an intuitive user interface.

Intuitive Keypad

The fitted rubber keypad has dedicated keys for power, backlight, up/down arrows, help, and alphanumeric characters. The meter also features two virtual soft keys that navigate the user through the configuration of each parameter, meter setup and logging of data. The interface is intuitive for any user’s level of experience.

Dedicated Help Key

Contextual help is always available through a dedicated “HELP” key. Clear tutorial messages and directions are available on-screen to quickly and easily guide users through setup and calibration.  The help information displayed is relative to the setting/option being viewed.

Auto-sensor Recognition

The probe and meter automatically recognize the sensors that are connected. Any ports not used on the probe will not have the parameter displayed or be configurable.

Automatic temperature compensation

The integrated temperature sensor allows for automatic temperature compensation of pH, conductivity, and dissolved oxygen measurements.

Automatic Barometric Pressure Compensation

The meter features a built-in barometer with user-selectable units for dissolved oxygen pressure compensation.

Quick Calibration

Quick Calibration provides a speedy, single-point calibration for pH, conductivity, and dissolved oxygen. Standard calibration options are available including pH up to three points, Conductivity at one point, and dissolved oxygen up to two points.

GLP Data

HI9829 includes a GLP feature that allows users to view calibration data and calibration expiration information at the touch of a key. Calibration data includes the date, time, buffers/standards used for calibration, and slope characteristics.

Data Logging

The HI9829 allows users to store up to 44,000 continuous or log-on-demand samples with logging intervals from one second to three hours.

Graphing Capability

Trend graphing with sample date and time stamp may be viewed on the display or transferred to a pc.

PC Connectivity

Logged data can be transferred to a Windows-compatible PC with the included HI7698291 USB adapter and HI929829 software.

Long Battery Life

The display of the meter has a battery icon indicator to show the remaining power. The meter is supplied with four 1.5V “C “ NiMH rechargeable batteries that provide up to 140 hours of battery life*

Rugged thermoformed carrying case

The HI9829 meter, probe, and all accessories are supplied in a rugged carrying case designed to provide years of use. The inside compartment of the carrying case is thermoformed to securely hold and protect all of the components.
* Without GPS or turbidity measurements

GPS Option

The meter features an internal 12 channel GPS receiver and antenna that calculates its position to track locations along with measurement data.

Fast Tracker™—Tag Identification System

HANNA’s Fact Tracker™—Tag Identification System simplifies test logging. iButtons with a unique ID can be installed at various sampling sites. When the matching connector on the meter contacts the location button, measurements are logged and labeled with the alphanumeric user-entered location ID. Location, date, time and measurements are logged into the meter which can be transferred to a PC. The Fast Tracker™ system complements the GPS for ultimate tracking.

iButton. Tags are Easy to Install

Install the optional TAGs near your sampling points for quick and easy iButton readings. Each TAG contains a computer chip with a unique identification code encased in stainless steel. You can install a practically unlimited amount of TAGs. Additional TAGs can be ordered for all of your traceability requirements.

 

Hanna HI9829 how to use

INITIALIZATION AND MEASUREMENT
HI9829 is supplied with 4 rechargeable, size C NiMH (Nickel-metal hydride) batteries.
The battery symbol on the LCD indicates the remaining battery charge. The meter has a low battery warning, and when the symbol starts blinking, batteries should be charged or replaced with new ones.
When the batteries are discharged the meter will automatically shut off to avoid erroneous readings.
Meter Battery Installation
Replace batteries in safe areas only.
Remove the 4 screws on the rear of the instrument and insert the batteries observing polarity.
If you wish to replace the supplied rechargeable batteries with non-rechargeable alkaline batteries, move the switch in the battery compartment upward.
A warning message is displayed if you connect the charging cable to a meter with alkaline batteries.
Non-rechargeable alkaline batteries can explode or leak if you try to charge them. Verify
that the switch is in the up position when using alkaline batteries to prevent recharging.
Note: Do not mix old and new alkaline batteries.

Learn more in the  Instruction Manual / Quick Start Guide