This Mobile base station RTR-500/RTR500B series allows you to combine a range of wireless radio communication loggers with various data collectors to meet your needs.
Great for transport, greenhouses and construction sites
The RTR500BM is a data collector equipped with 4G mobile network capability. It collects data from nearby data loggers via wireless radio communication, then automatically sends it via a 4G cellular network* to the free “T&D WebStorage Service” cloud storage service for anytime, anywhere access.
The RTR500BM also has a warning monitoring feature that sends a warning email via the T&D WebStorage Service when a set limit is exceeded.
It’s perfect for situations where you don’t have a PC or LOCAL NETWORK available, such as during transport, in greenhouses or on construction sites. As long as you can provide power, you can collect and transfer data without worry or stress.
*A SIM card is required. Some carriers in the US are not supported and cannot be used with the RTR500BM. Please contact your T&D distributor for details. For more information on carriers in other countries, contact your local T&D distributor.
.png)
The RTR500BM can be combined with any of our RTR-500/RTR500B series data loggers. And up to 20 loggers can be registered for simultaneous use. Use our PC software “RTR500BM for Windows” or the mobile app “T&D 500B Utility” to make mobile communication settings.
Because it uses mobile networking to transfer data, all you need to do is secure a power source and be in mobile range in order to send data to our cloud-based “T&D WebStorage Service” which makes it easy to check data, display graphs, and check warnings from your PC, smartphone or tablet anytime, anywhere.
Upon a warning, notification can automatically be sent via e-mail from T&D WebStoarge Service and/or by connecting a buzzer or lamp to the contact output, you can set up an on-site alarm.
| RTR500BM | |
|
Compatible Devices |
Remote Units: RTR501B / 502B / 503B / 505B / 507B
RTR-501 / 502 / 503 / 507S / 574 / 576 / 505-TC / 505-Pt / 505-V / 505-mA / 505-P (*1) (Including L Type and S Type) Repeaters: RTR500BC, RTR-500 (*1) |
| Maximum Number of Regis- trations | Remote Units: 20 units Repeaters: 5 units x 4 groups |
|
Communication Interfaces |
Short Range Wireless Communication
<For US> Frequency Range: 902 to 928MHz RF Power: 7mW Transmission Range: About 150 meters (500 ft) if unobstructed and direct <For EU> Frequency Range: 869.7 to 870MHz RF Power: 5mW Transmission Range: About 150 meters if unobstructed and direct LTE Communication <For US> LTE-FDD: B2/B4/B12 WCDMA: B2/B5 <For EU> LTE-FDD: B1/B3/B5/B7/B8/B20 LTE-TDD: B38/B40/B41 WCDMA: B1/B5/B8 GSM: 900/1800MHz Bluetooth 4.2 (Bluetooth Low Energy) For Settings USB 2.0 (Mini-B connector) For Settings Optical Communication (proprietary protocol) |
|
Communication Time |
Data Download Time from Remote Unit (for 16,000 readings) Via wireless communication: About 2 min.
An additional 30 seconds should be added for each Repeater. (*2) Does not include communication time from Base Unit to server over LTE. |
|
External Alarm Input/Output Terminal (*3) |
Input Terminal: Contact Input Internal Pull-up: 3V 100kΩ Maximum Input Voltage: 30V
Output Terminal: Photo Mos Relay Output OFF-State Voltage: AC/DC 50V or less ON-State Current: 0.1 A or less ON-State Resistance: 35Ω |
| Communications Protocol (*4) | HTTP, HTTPS, FTP, SNTP |
|
Power |
AC Adaptor (AD-05A3 or AD-05C1)
External Battery Connection Adaptor BC-0204 (DC 9-38V) AA Alkaline Battery LR6 x 4 |
|
Battery Life (*5) |
Expected battery life with only AA alkaline batteries:
Approx. 3 days under the following conditions (only one Remote Unit and no Repeaters, downloading data once a day, sending current readings at 10-min interval) |
| Dimensions | H 96 mm x W 66 mm x D 38.6 mm (excluding antenna) Antenna Length (Cellular/Local): 135 mm |
| Weight | Approx. 135 g |
| Operating Environment | Temperature: -10 to 60 °C
Humidity: 90 %RH or less (without condensation) |
| Accessories | AA Alkaline Battery LR6 x 4, Antenna CSR-0011 x 2 (Cellular/Local),USB Mini-B Cable US-15C, AC Adaptor AD-05A3 or AD-05C1, Registration Code Label, Manual Set (Warranty Included) |
| GPS Interface (*6) | Connector: SMA Female Jack Power Supply: 3.3V |
| SIM Card | nano SIM Card (*7) |
*1: RTR-500 Series loggers and Repeaters do not have Bluetooth capability.
*2: When using RTR500BC as Repeater. Depending upon conditions it may take up to an additional 2 minutes.
*3: In order to use the external terminal, please purchase the optional alarm connection cable (AC0101).
*4: Client Function
*5: Battery life depends on several factors, including number of warning reports sent, ambient temperature, radio environment, frequency of communication, and quality of the battery being used. All estimates are based on operations carried out with a new battery and are in no way a guarantee of actual battery life.
*6: In order to use the GPS function (to attach geographical positioning info to current readings data),please purchase a compatible GPS antenna (SMA Male Plug).
*7: Please prepare a contracted SIM card (with a minimum speed of 200Kbps) separately.
The specifications listed above are subject to change without notice.
This Mobile base station RTR-500/RTR500B series allows you to combine a range of wireless radio communication loggers with various data collectors to meet your needs.
Great for transport, greenhouses and construction sites
The RTR500BM is a data collector equipped with 4G mobile network capability. It collects data from nearby data loggers via wireless radio communication, then automatically sends it via a 4G cellular network* to the free “T&D WebStorage Service” cloud storage service for anytime, anywhere access.
The RTR500BM also has a warning monitoring feature that sends a warning email via the T&D WebStorage Service when a set limit is exceeded.
It’s perfect for situations where you don’t have a PC or LOCAL NETWORK available, such as during transport, in greenhouses or on construction sites. As long as you can provide power, you can collect and transfer data without worry or stress.
*A SIM card is required. Some carriers in the US are not supported and cannot be used with the RTR500BM. Please contact your T&D distributor for details. For more information on carriers in other countries, contact your local T&D distributor.
The RTR500BM can be combined with any of our RTR-500/RTR500B series data loggers. And up to 20 loggers can be registered for simultaneous use. Use our PC software “RTR500BM for Windows” or the mobile app “T&D 500B Utility” to make mobile communication settings.
Because it uses mobile networking to transfer data, all you need to do is secure a power source and be in mobile range in order to send data to our cloud-based “T&D WebStorage Service” which makes it easy to check data, display graphs, and check warnings from your PC, smartphone or tablet anytime, anywhere.
Upon a warning, notification can automatically be sent via e-mail from T&D WebStoarge Service and/or by connecting a buzzer or lamp to the contact output, you can set up an on-site alarm.
| RTR500BM | |
|
Compatible Devices |
Remote Units: RTR501B / 502B / 503B / 505B / 507B
RTR-501 / 502 / 503 / 507S / 574 / 576 / 505-TC / 505-Pt / 505-V / 505-mA / 505-P (*1) (Including L Type and S Type) Repeaters: RTR500BC, RTR-500 (*1) |
| Maximum Number of Regis- trations | Remote Units: 20 units Repeaters: 5 units x 4 groups |
|
Communication Interfaces |
Short Range Wireless Communication
<For US> Frequency Range: 902 to 928MHz RF Power: 7mW Transmission Range: About 150 meters (500 ft) if unobstructed and direct <For EU> Frequency Range: 869.7 to 870MHz RF Power: 5mW Transmission Range: About 150 meters if unobstructed and direct LTE Communication <For US> LTE-FDD: B2/B4/B12 WCDMA: B2/B5 <For EU> LTE-FDD: B1/B3/B5/B7/B8/B20 LTE-TDD: B38/B40/B41 WCDMA: B1/B5/B8 GSM: 900/1800MHz Bluetooth 4.2 (Bluetooth Low Energy) For Settings USB 2.0 (Mini-B connector) For Settings Optical Communication (proprietary protocol) |
|
Communication Time |
Data Download Time from Remote Unit (for 16,000 readings) Via wireless communication: About 2 min.
An additional 30 seconds should be added for each Repeater. (*2) Does not include communication time from Base Unit to server over LTE. |
|
External Alarm Input/Output Terminal (*3) |
Input Terminal: Contact Input Internal Pull-up: 3V 100kΩ Maximum Input Voltage: 30V
Output Terminal: Photo Mos Relay Output OFF-State Voltage: AC/DC 50V or less ON-State Current: 0.1 A or less ON-State Resistance: 35Ω |
| Communications Protocol (*4) | HTTP, HTTPS, FTP, SNTP |
|
Power |
AC Adaptor (AD-05A3 or AD-05C1)
External Battery Connection Adaptor BC-0204 (DC 9-38V) AA Alkaline Battery LR6 x 4 |
|
Battery Life (*5) |
Expected battery life with only AA alkaline batteries:
Approx. 3 days under the following conditions (only one Remote Unit and no Repeaters, downloading data once a day, sending current readings at 10-min interval) |
| Dimensions | H 96 mm x W 66 mm x D 38.6 mm (excluding antenna) Antenna Length (Cellular/Local): 135 mm |
| Weight | Approx. 135 g |
| Operating Environment | Temperature: -10 to 60 °C
Humidity: 90 %RH or less (without condensation) |
| Accessories | AA Alkaline Battery LR6 x 4, Antenna CSR-0011 x 2 (Cellular/Local),USB Mini-B Cable US-15C, AC Adaptor AD-05A3 or AD-05C1, Registration Code Label, Manual Set (Warranty Included) |
| GPS Interface (*6) | Connector: SMA Female Jack Power Supply: 3.3V |
| SIM Card | nano SIM Card (*7) |
*1: RTR-500 Series loggers and Repeaters do not have Bluetooth capability.
*2: When using RTR500BC as Repeater. Depending upon conditions it may take up to an additional 2 minutes.
*3: In order to use the external terminal, please purchase the optional alarm connection cable (AC0101).
*4: Client Function
*5: Battery life depends on several factors, including number of warning reports sent, ambient temperature, radio environment, frequency of communication, and quality of the battery being used. All estimates are based on operations carried out with a new battery and are in no way a guarantee of actual battery life.
*6: In order to use the GPS function (to attach geographical positioning info to current readings data),please purchase a compatible GPS antenna (SMA Male Plug).
*7: Please prepare a contracted SIM card (with a minimum speed of 200Kbps) separately.
The specifications listed above are subject to change without notice.
