BrewLab® Pro – the professional test kit for craft brewing
LaMotte introduces the new BrewLab® Pro water analysis kit. Designed with the professional brewer in mind, this kit measures 11 test factors which are important in the brewing process. Water is the most important ingredient for any brewer. The BrewLab® Pro helps you to make your best craft brew and reproduce your results time and time again!
Test for 11 Essential Factors
- Chloride
- Sulfate
- Alkalinity
- Total Hardness
- Calcium Hardness
- Magnesium Hardness
- Sodium
- pH
- Temperature
- Total Dissolved Solids
- Dissolved Oxygen
Specifications
| Test Factor | Test System | Range | # of Tests |
| Chloride | Direct Reading Titrator | 1 drop = 10ppm, 25 ppm | Approx. 80 |
| Sulfate | Turbidimetric | 0-200 ppm sulfate | 50 |
| Alkalinity | Direct Reading Titrator | 0-200 ppm (and higher) as CaCO3 | 50 at 200 ppm |
| Total Hardness | Direct Reading Titrator | 0-200 ppm (and higher) as CaCO3 | 50 at 200 ppm |
| Calcium Hardness | Direct Reading Titrator | 0-200 ppm (and higher) as CaCO3 | 50 at 200 ppm |
| Magnesium Hardness | Calculation | — | — |
| Sodium | Calculation | — | — |
| pH | Electrometric | 0.0-14.0 pH | Unlimited |
| Temperature | Electrometric | 32 to 149°F (0 to 65°C) | Unlimited |
| Total Dissolved Solids | Electrometric | 0 to 99.9 ppm (mg/L), 100 to 999 ppm (mg/L), 1.00 to 9.99 ppt |
Unlimited |
| Dissolved Oxygen (Sat. Mode) | Electrometric | 0 to 200.0% | Unlimited |
| Dissolved Oxygen (Conc. Mode) | Electrometric | 0 to 20.00 ppm (mg/L) | Unlimited |
BrewLab® Pro – the professional test kit for craft brewing
LaMotte introduces the new BrewLab® Pro water analysis kit. Designed with the professional brewer in mind, this kit measures 11 test factors which are important in the brewing process. Water is the most important ingredient for any brewer. The BrewLab® Pro helps you to make your best craft brew and reproduce your results time and time again!
Test for 11 Essential Factors
- Chloride
- Sulfate
- Alkalinity
- Total Hardness
- Calcium Hardness
- Magnesium Hardness
- Sodium
- pH
- Temperature
- Total Dissolved Solids
- Dissolved Oxygen
Specifications
| Test Factor | Test System | Range | # of Tests |
| Chloride | Direct Reading Titrator | 1 drop = 10ppm, 25 ppm | Approx. 80 |
| Sulfate | Turbidimetric | 0-200 ppm sulfate | 50 |
| Alkalinity | Direct Reading Titrator | 0-200 ppm (and higher) as CaCO3 | 50 at 200 ppm |
| Total Hardness | Direct Reading Titrator | 0-200 ppm (and higher) as CaCO3 | 50 at 200 ppm |
| Calcium Hardness | Direct Reading Titrator | 0-200 ppm (and higher) as CaCO3 | 50 at 200 ppm |
| Magnesium Hardness | Calculation | — | — |
| Sodium | Calculation | — | — |
| pH | Electrometric | 0.0-14.0 pH | Unlimited |
| Temperature | Electrometric | 32 to 149°F (0 to 65°C) | Unlimited |
| Total Dissolved Solids | Electrometric | 0 to 99.9 ppm (mg/L), 100 to 999 ppm (mg/L), 1.00 to 9.99 ppt |
Unlimited |
| Dissolved Oxygen (Sat. Mode) | Electrometric | 0 to 200.0% | Unlimited |
| Dissolved Oxygen (Conc. Mode) | Electrometric | 0 to 20.00 ppm (mg/L) | Unlimited |
