Phase II UTG4000 Ultrasonic Thickness Gauge has A and B Scan as well as Thru Coating Capability, and utilizes color waveform A-scan and time-based B-scan for absolute correctness
This multi-functional ultrasonic thickness gauge offers everything from basic measurement, scan mode with Min/Max viewing, GO/NO GO display, adjustable sound velocity, and thru-coating capabilities.
This dynamic ultrasonic thickness gauge is designed to measure the thickness of metallic and non-metallic materials in critical situations that ordinary thickness gauges couldn’t do.
The UTG-4000 ultrasonic thickness gauge will accurately display readings in either inch or millimeter after a simple calibration to a known thickness or sound velocity.
Ultrasonic Thickness Gauge – Phase II UTG-4000 Ultrasonic thickness gauge Revised
Specifications
| Operating Principle | Ultrasonic pulse/echo method with the dual-element probe |
| Display type | 2.4” Color Screen |
| Resolution | 0.001”, .01” /0.01mm (selectable) |
| Measuring Range | Standard Mode: 0.02-20.0” (10mm-145mm) Dependent upon probe & material
Thru-Coating Mode (E-E): 0.09″ to 0.984″ |
| Repeatability | +/-.001” (+/-0.05mm) |
| Sound velocity range | 0.0197-0.3937in/us (500-9999m/s) |
| Measuring Error: | 0.001”(up to 0.984”) 0.007”(up to 3.03” 0.019”( 4” and above) |
| Display Modes: | Digital Thickness Readout A-scan or Waveform Min/Max Capture D-Value / Reduction |
| V-Path Correction | Automatic |
| Update rate | Selectable: 4Hz, 8Hz, 16Hz |
| Refresh rate | 4/second |
| Alarm Settings | Min/Max Alarm Dynamic waveform color change on alarm |
| Operating temperature | 14-122ºF (-10ºC – +50ºC) |
| Auto Shut-Off | After 5 minutes |
| Power supply | 3v AA alkaline batteries (2pc) |
| Operating Time | Approx. 36 hours |
| Dimensions | 6.02” x 2.99” x 1.45” (153 x 76 x 37mm) |
| Weight | 9.9oz (280g) |
Phase II UTG-4000 Ultrasonic Thickness Gauge Features:
- Ultrasonic Thickness Gauge w/ A & B Scan and Thru Capability
- This handheld unit has the precise touch and reads capabilities yet is economically priced.
- Designed to measure the thickness of metallic and non-metallic materials such as aluminum, titanium, plastics, ceramics, glass, and any other good ultrasonic wave conductor as long as it has parallel top and bottom surfaces.
- The direct contact method of pulse/echo type ultrasonic thickness gauges requires the use of a couplant. Propylene Glycol is common, but many other substances can be used.
- Easy to configure and use, many gauges today have the ability to retain memory, output to printers, PC’s, and handheld portable devices.
UTG-4000 Probe Specifications:
| Part No. |
UTG3000-400 |
UTG3000-475 |
UTG3000-404 |
UTG3000-440 |
UTG3000-450 |
|
Probe Style |
Standard |
Small Tube |
Extreme small tube |
Rough surface/ |
Hi-Temp |
|
Frequency |
5MHz |
7.5 MHz |
10 MHz |
2 MHz |
5 MHz |
|
Contact Dia. |
8mm |
6mm |
4mm |
17mm |
15mm |
|
Measure range: |
.031-3.93” |
.031-1.18” |
.019-.787” |
.157-20” |
.157-3.14” |
|
Temperature |
14-158ºF |
14-158ºF |
14-158ºF |
14-158ºF |
0-572ºF |
| Picture
|
 |
|
 |
 |
 |
QUICK TIP:
Maintenance:
1. Always keep your gauge, probe, cable clean of any dirt, dust, fluids, etc to prevent early wear of these parts.
2. Be sure to avoid any caustic liquid such as alcohol or viscous fluids to prevent corrosion to the cover and the display window. Clean with water only.
3. Avoid scratching the surface of the probe. A worn probe will cause unstable readings.
Phase II UTG4000 Ultrasonic Thickness Gauge has A and B Scan as well as Thru Coating Capability, and utilizes color waveform A-scan and time-based B-scan for absolute correctness
This multi-functional ultrasonic thickness gauge offers everything from basic measurement, scan mode with Min/Max viewing, GO/NO GO display, adjustable sound velocity, and thru-coating capabilities.
This dynamic ultrasonic thickness gauge is designed to measure the thickness of metallic and non-metallic materials in critical situations that ordinary thickness gauges couldn’t do.
The UTG-4000 ultrasonic thickness gauge will accurately display readings in either inch or millimeter after a simple calibration to a known thickness or sound velocity.
Ultrasonic Thickness Gauge – Phase II UTG-4000 Ultrasonic thickness gauge Revised
Specifications
| Operating Principle | Ultrasonic pulse/echo method with the dual-element probe |
| Display type | 2.4” Color Screen |
| Resolution | 0.001”, .01” /0.01mm (selectable) |
| Measuring Range | Standard Mode: 0.02-20.0” (10mm-145mm) Dependent upon probe & material
Thru-Coating Mode (E-E): 0.09″ to 0.984″ |
| Repeatability | +/-.001” (+/-0.05mm) |
| Sound velocity range | 0.0197-0.3937in/us (500-9999m/s) |
| Measuring Error: | 0.001”(up to 0.984”) 0.007”(up to 3.03” 0.019”( 4” and above) |
| Display Modes: | Digital Thickness Readout A-scan or Waveform Min/Max Capture D-Value / Reduction |
| V-Path Correction | Automatic |
| Update rate | Selectable: 4Hz, 8Hz, 16Hz |
| Refresh rate | 4/second |
| Alarm Settings | Min/Max Alarm Dynamic waveform color change on alarm |
| Operating temperature | 14-122ºF (-10ºC – +50ºC) |
| Auto Shut-Off | After 5 minutes |
| Power supply | 3v AA alkaline batteries (2pc) |
| Operating Time | Approx. 36 hours |
| Dimensions | 6.02” x 2.99” x 1.45” (153 x 76 x 37mm) |
| Weight | 9.9oz (280g) |
Phase II UTG-4000 Ultrasonic Thickness Gauge Features:
- Ultrasonic Thickness Gauge w/ A & B Scan and Thru Capability
- This handheld unit has the precise touch and reads capabilities yet is economically priced.
- Designed to measure the thickness of metallic and non-metallic materials such as aluminum, titanium, plastics, ceramics, glass, and any other good ultrasonic wave conductor as long as it has parallel top and bottom surfaces.
- The direct contact method of pulse/echo type ultrasonic thickness gauges requires the use of a couplant. Propylene Glycol is common, but many other substances can be used.
- Easy to configure and use, many gauges today have the ability to retain memory, output to printers, PC’s, and handheld portable devices.
UTG-4000 Probe Specifications:
| Part No. |
UTG3000-400 |
UTG3000-475 |
UTG3000-404 |
UTG3000-440 |
UTG3000-450 |
|
Probe Style |
Standard |
Small Tube |
Extreme small tube |
Rough surface/ |
Hi-Temp |
|
Frequency |
5MHz |
7.5 MHz |
10 MHz |
2 MHz |
5 MHz |
|
Contact Dia. |
8mm |
6mm |
4mm |
17mm |
15mm |
|
Measure range: |
.031-3.93” |
.031-1.18” |
.019-.787” |
.157-20” |
.157-3.14” |
|
Temperature |
14-158ºF |
14-158ºF |
14-158ºF |
14-158ºF |
0-572ºF |
| Picture
|
|
|
|
|
|
QUICK TIP:
Maintenance:
1. Always keep your gauge, probe, cable clean of any dirt, dust, fluids, etc to prevent early wear of these parts.
2. Be sure to avoid any caustic liquid such as alcohol or viscous fluids to prevent corrosion to the cover and the display window. Clean with water only.
3. Avoid scratching the surface of the probe. A worn probe will cause unstable readings.
