Paint Coating Thickness Gauge DFT | Elcometer 456 Integral (All-in-one model)

Elcometer 456
stable, repeatable readings on flat or curved surfaces

$1,202.00 CAD$2,594.00 CAD

  • 12 months limited warranty
  • Built-in integral probe
  • Displays 3 individual readings
  • Pre-calibrated with 4 profile ranges

What model suits me best?
1 800 463-4363

The Paint Coating Thickness Gauge Elcometer 456 sets new standards for measuring the thickness of a coating, helping you to become more efficient.

Elcometer 456 is ideal for single-handed operation as the wide footprint of the Bigfoot™ internal probe provides greater stability during dry film thickness measurement – allowing for consistent, repeatable, and accurate results.

Beginning with Model E and ending with Model T, the Elcometer 456 is available in four different models. Each model level offers increased functionality designed to meet your specific needs. Our most advanced model, Model T features memory, alpha-numeric batching, and Bluetooth® communication.

 

No need to calibrate just select the relevant surface profile and start measuring
Easy to use straight from the box – minimal training required
Readings can be transferred via Bluetooth® or USB to ElcoMaster® or your own software application for instant report generation and record-keeping
USB or Bluetooth® data output to the ElcoMaster® App or your own software application
Easy to use menu structure in multiple languages: English, French, Spanish, German, Chinese & Japanese
Built-in integral probe for stable, repeatable readings on flat or curved surfaces
Displays 3 individual readings together with their average in microns or mils
Pre-calibrated with 4 profile ranges: Profile Metric Imperial Smooth 0-25µm 0-1mil Fine 25-60µm 1-2mils Medium 60-100µm 2-3mils Coarse >100µm 3-4mils

Specifications:

Part Number Description Certificate
A456CFI1-IPC Elcometer 456 IPC Dry Film Thickness Gauge
Built-in probe type Ferrous
Reading Rate 70+ readings per minute
Range 0 – 1500μm (0 – 60mils)
Resolution 10μm / 1mil (where 5μm / 0.5 mil is rounded up)
Accuracy** ±5%
Minimum Substrate Thickness 300μm (12mils)
Operating Temperature -10 to 50°C (14 to 122°F)
Power Supply 2 x AA batteries (rechargeable batteries can be used)
Battery Life† Alkaline: Approx. 16 hours Lithium: Approx. 24 hours
Weight (including batteries) 156g (5.5oz)
Gauge Dimensions 141 x 73 x 37mm (5.55 x 2.87 x 1.46″)
Packing List Elcometer 456 IPC Gauge, calibration foils, wrist harness, protective case, 1 x screen protector, USB cable, test certificate, 2 x AA batteries & user guide.


Elcometer-456-Geneqonline

 

 

STANDARDS: ASTM D7091, ISO 2808, ISO 19840, SSPC PA-2, US Navy NSI 009-32

 

QUICK TIP:

How to take a reading with Elcometer 456:

1. Whilst holding the gauge perpendicular, gently place the probe onto the surface.
· Do not drag the probe across the surface or bang the probe down hard onto the surface as this will damage the probe tip resulting in inaccurate readings.
· >1500µm’ (’>60mils’) indicates a reading over the probe range.

2. For subsequent readings, lift the probe off and then replace it on the coated surface.
· Do not allow the probe to hover over the surface as this could result in a false reading.

The first reading taken is displayed next to ‘1′, the second next to ‘2′ etc. When the third reading has been taken, the average (mean, xbar) of the three individual readings displayed is shown (X:).

The average (mean, xbar) reading is cleared when a fourth reading is taken.

By selecting ‘Send Individual Readings’ or ‘Send Mean (xbar) Reading’ via Menu/Bluetooth, the user can choose to transfer the individual readings or just the average (mean, xbar) reading values to ® ® ElcoMaster or ElcoMaster Mobile Apps – see Section 7 on page 7.

Download Data Sheet
Download Instruction Manual

1-Free-shipping

 

VISIT TESTCOATINGS.CA FOR MORE ELCOMETER PRODUCTS

 

The Paint Coating Thickness Gauge Elcometer 456 sets new standards for measuring the thickness of a coating, helping you to become more efficient.

Elcometer 456 is ideal for single-handed operation as the wide footprint of the Bigfoot™ internal probe provides greater stability during dry film thickness measurement – allowing for consistent, repeatable, and accurate results.

Beginning with Model E and ending with Model T, the Elcometer 456 is available in four different models. Each model level offers increased functionality designed to meet your specific needs. Our most advanced model, Model T features memory, alpha-numeric batching, and Bluetooth® communication.

 

No need to calibrate just select the relevant surface profile and start measuring
Easy to use straight from the box – minimal training required
Readings can be transferred via Bluetooth® or USB to ElcoMaster® or your own software application for instant report generation and record-keeping
USB or Bluetooth® data output to the ElcoMaster® App or your own software application
Easy to use menu structure in multiple languages: English, French, Spanish, German, Chinese & Japanese
Built-in integral probe for stable, repeatable readings on flat or curved surfaces
Displays 3 individual readings together with their average in microns or mils
Pre-calibrated with 4 profile ranges: Profile Metric Imperial Smooth 0-25µm 0-1mil Fine 25-60µm 1-2mils Medium 60-100µm 2-3mils Coarse >100µm 3-4mils

Specifications:

Part Number Description Certificate
A456CFI1-IPC Elcometer 456 IPC Dry Film Thickness Gauge
Built-in probe type Ferrous
Reading Rate 70+ readings per minute
Range 0 – 1500μm (0 – 60mils)
Resolution 10μm / 1mil (where 5μm / 0.5 mil is rounded up)
Accuracy** ±5%
Minimum Substrate Thickness 300μm (12mils)
Operating Temperature -10 to 50°C (14 to 122°F)
Power Supply 2 x AA batteries (rechargeable batteries can be used)
Battery Life† Alkaline: Approx. 16 hours Lithium: Approx. 24 hours
Weight (including batteries) 156g (5.5oz)
Gauge Dimensions 141 x 73 x 37mm (5.55 x 2.87 x 1.46″)
Packing List Elcometer 456 IPC Gauge, calibration foils, wrist harness, protective case, 1 x screen protector, USB cable, test certificate, 2 x AA batteries & user guide.


Elcometer-456-Geneqonline

 

 

STANDARDS: ASTM D7091, ISO 2808, ISO 19840, SSPC PA-2, US Navy NSI 009-32

 

QUICK TIP:

How to take a reading with Elcometer 456:

1. Whilst holding the gauge perpendicular, gently place the probe onto the surface.
· Do not drag the probe across the surface or bang the probe down hard onto the surface as this will damage the probe tip resulting in inaccurate readings.
· >1500µm’ (’>60mils’) indicates a reading over the probe range.

2. For subsequent readings, lift the probe off and then replace it on the coated surface.
· Do not allow the probe to hover over the surface as this could result in a false reading.

The first reading taken is displayed next to ‘1′, the second next to ‘2′ etc. When the third reading has been taken, the average (mean, xbar) of the three individual readings displayed is shown (X:).

The average (mean, xbar) reading is cleared when a fourth reading is taken.

By selecting ‘Send Individual Readings’ or ‘Send Mean (xbar) Reading’ via Menu/Bluetooth, the user can choose to transfer the individual readings or just the average (mean, xbar) reading values to ® ® ElcoMaster or ElcoMaster Mobile Apps – see Section 7 on page 7.

Download Data Sheet
Download Instruction Manual

1-Free-shipping

 

VISIT TESTCOATINGS.CA FOR MORE ELCOMETER PRODUCTS